Skip to main content

Volvo Trucks develops I-See to save fuel

Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,
June 28, 2012 Read time: 3 mins
RSS5874 Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,000 kms (3,100 mls).

“I-See is an autopilot linked to the truck’s cruise control, taking over and handling gear-changes, accelerator and brakes on gradients, ensuring they all operate in the most fuel-efficient way possible. I-See freewheels as much as possible – so on certain stretches of road no fuel is used at all,” explains Hayder Wokil, product manager at Volvo Trucks. “In this way fuel consumption can be cut by up to five per cent, a figure based on the results of simulations and tests on public roads. I-See requires use of the cruise control, and we know that on average drivers use cruise control about half the time. For a truck in normal operation, covering 140,000 kilometres (87,000 miles) a year, the saving will be about 1,000 litres of fuel annually. This makes a big difference to the haulage firm’s profitability.

I-See carries out six different operations to utilise the kinetic energy to the very maximum. For instance, it accelerates up hills, remains in a high gear for as long as possible and freewheels on descents to exploit the truck’s weight as a propulsion motor. Volvo says the system works best in undulating terrain. With moderately long and steep slopes, it ensures the truck can freewheel for long distances without using the engine,”

“It is this freewheeling capability that makes the system special,” explains Anders Eriksson, who was responsible for the development of I-See. “When the truck rolls freely, virtually no fuel is used. But in order to freewheel, a whole lot of data is required. It imposes high demands on precision. For instance, you have to know whether your speed will drop or increase over the next stretch of road. A gradient of just a few per cent can be the decisive factor,” Eriksson said. Other factors that make a difference are air resistance and the truck’s weight. All told the system has to keep track of and process a lot of information.

Eriksson also points out that it is not only fuel that is saved. “I-See reduces brake and tyre wear, for instance, and that naturally benefits the environment,” he says.

For more information on companies in this article

Related Content

  • Autopilot highlights shape of Things
    March 30, 2020
    Driverless vehicles require rich data to operate safely, and a European consortium is harnessing the Internet of Things to help.
  • Mobinet counters weighty cross border concerns
    November 9, 2017
    A Mobinet pilot is combining onboard weighing with V2X comms to streamline vehicle weight enforcement. David Crawford reports. Pan-European, cross-border weigh-in-motion (WIM) for trucks is now a practical possibility, following successful Scandinavian trials within the EU-co-funded Mobinet (Internet of Mobility) programme. New technology is using strain sensors, located on load-bearing components and routinely installed in truck fleet management systems.
  • WIM industry ponders certification challenge
    April 29, 2019
    It’s hard to pin down the world of Weigh in Motion. Adam Hill asks five of the sector’s leading players about current developments – and whether problems with certification will ever be solved
  • In-vehicle intersection violation Warning system
    January 31, 2012
    Mike Schagrin, ITS Joint Program Office, RITA, and John Harding, NHTSA, describe US progress towards an in-vehicle Intersection Violation Warning system. In 2008, there were 37,261 fatalities on US roadways. Of these, 7,772, some 20.8 per cent of the total, were defined as intersection crashes or intersection-related crashes. Through a multi-agency research initiative led by the Research and Innovative Technology Administration (RITA), the US Department of Transportation (USDOT) has developed a prototype In