Skip to main content

Volvo Trucks develops I-See to save fuel

Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,
June 28, 2012 Read time: 3 mins
RSS5874 Volvo Trucks has announced it has developed I-See, which operates like an autopilot and takes over gear-changing and utilises gradients to save fuel. The system, which will be available on the market next year, is linked to the transmission’s tilt sensor and obtains information about the topography digitally. The fact that the system is not dependent on maps makes it more dependable since it always obtains the very latest information. I-See can recall about 4,000 gradients, corresponding to a distance of 5,000 kms (3,100 mls).

“I-See is an autopilot linked to the truck’s cruise control, taking over and handling gear-changes, accelerator and brakes on gradients, ensuring they all operate in the most fuel-efficient way possible. I-See freewheels as much as possible – so on certain stretches of road no fuel is used at all,” explains Hayder Wokil, product manager at Volvo Trucks. “In this way fuel consumption can be cut by up to five per cent, a figure based on the results of simulations and tests on public roads. I-See requires use of the cruise control, and we know that on average drivers use cruise control about half the time. For a truck in normal operation, covering 140,000 kilometres (87,000 miles) a year, the saving will be about 1,000 litres of fuel annually. This makes a big difference to the haulage firm’s profitability.

I-See carries out six different operations to utilise the kinetic energy to the very maximum. For instance, it accelerates up hills, remains in a high gear for as long as possible and freewheels on descents to exploit the truck’s weight as a propulsion motor. Volvo says the system works best in undulating terrain. With moderately long and steep slopes, it ensures the truck can freewheel for long distances without using the engine,”

“It is this freewheeling capability that makes the system special,” explains Anders Eriksson, who was responsible for the development of I-See. “When the truck rolls freely, virtually no fuel is used. But in order to freewheel, a whole lot of data is required. It imposes high demands on precision. For instance, you have to know whether your speed will drop or increase over the next stretch of road. A gradient of just a few per cent can be the decisive factor,” Eriksson said. Other factors that make a difference are air resistance and the truck’s weight. All told the system has to keep track of and process a lot of information.

Eriksson also points out that it is not only fuel that is saved. “I-See reduces brake and tyre wear, for instance, and that naturally benefits the environment,” he says.

For more information on companies in this article

Related Content

  • Successful Bio-DME field tests point to a cleaner transport system
    June 4, 2012
    Volvo Trucks has announced it is running successful field tests with vehicles powered by bio-DME, a fuel that can be produced cost- and energy-efficiently from biomass. Since last autumn, ten specially adapted Volvo trucks have been operating on Swedish roads using the fuel which reduces carbon emissions by 95 per cent compared with conventional diesel. The field tests have now reached the halfway point and the results so far have both met, and exceeded, expectations.
  • The control room revolution - LCD screens and IP technology
    July 17, 2012
    Coming soon to a screen near you: Brady O. Bruce and John Stark of Jupiter Systems discuss trends in control room technologies. Perhaps the single most important trend in the control room environment over the last 12-18 months has been the accelerated move towards the adoption of flat-screen Liquid Crystal Display (LCD) technology. Having made their presence felt in the home environment, where they continue to replace outdated cathode ray tube-based technology, LCDs have reached the point where their perfor
  • Increasing road safety with automated driver assistance systems
    January 26, 2012
    Jon Masters looks at how drivers will be trained to use the increasing number of advanced driver assistance systems being incorporated into modern cars
  • Development of cooperative driving applications for work zones
    July 17, 2012
    The German AKTIV project is researching several cooperative driving applications for use in work zones. PTV's Michael Ortgiese details progress. The steep increases in traffic volumes predicted back in the early 1990s have unfortunately been proven to be more than accurate. In Germany, the AKTIV project continues to look into cooperative technologies' potential to reduce the impact of those increased traffic volumes and keep traffic moving despite limitations in infrastructure capacity.