Skip to main content

UK test centre ready to evaluate eCall product performance

InnovITS Advance, the UK research and development centre for telecommunications, automotive and electronics industries, has carried out a demonstration of capability in the area of eCall testing and certification.
March 26, 2012 Read time: 2 mins
RSS67 innovITS Advance, the UK research and development centre for telecommunications, automotive and electronics industries, has carried out a demonstration of capability in the area of eCall testing and certification. With its independent and fully controllable private GSM network and Skyclone GNSS denial capabilities, InnovITS says it is uniquely placed to provide an environment in which eCall systems can be tested under all conditions of signal quality and attenuation.

To carry out its demonstration of eCall, InnovITS worked together with partners 4306 Denso Corporation, 4308 Cinterion, 491 TRL, 4310 Mira and PMN, to connect the site’s private GSM network to an external eCall Public Service Access Point (PSAP). They are all now planning to work towards implementing a comprehensive eCall test and certification service based at InnovITS Advance, which claims to be one of the first such facilities to offer this service in Europe.

“By successfully demonstrating functionality tests on an eCall equipped vehicle, InnovITS Advance has thus proven its capability to act as a robust and reliable site for the testing and certification of eCall products,” explains the facility’s CEO Phil Pettitt. “The presence of a network of roads covered by a fully controllable private GSM network is fundamental to the ability to provide such a robust testing environment. Over the coming months we will be working with our partners to establish on a permanent basis an eCall test and certification service that can be offered to customers on a commercial basis.”

“eCall is a very promising technology which I believe will have a major role to play in improving emergency service response times in those EU states implementing the system,” added Marcel Visser, global vice president automotive of Cinterion and chairman of the 374 Ertico ITS Europe automotive suppliers sector platform. “By working together in a proactive manner, the technical partners in this self-funded project have demonstrated that the European automotive industry supply chain will be ready to embrace the test and certification needs of eCall using the dedicated ITS test and development facilities such as those of InnovITS Advance.”

For more information on companies in this article

Related Content

  • HORIBA MIRA and Coventry University launch Autonomous Vehicle Research Centre
    April 18, 2017
    UK-based vehicle engineering, research and product testing centre HORIBA MIRA has joined forces with Coventry University to launch a new automotive research centre dedicated to developing intelligent connected vehicle technology. The Centre for Connected & Autonomous Automotive Research will pioneer and test new developments to support the rapid growth within the global intelligent mobility sector and address future transport needs. An initial team of up to 20 academic staff members and doctoral resea
  • Peek ATC-1000 controller added to FDoT approved product list
    May 31, 2012
    Peek Traffic Corporation has announced the addition of its ATC-1000 controller to the Florida Department of Transportation's Approved Product List (APL). FDoT conducted rigorous testing procedures to verify suitability of the ATC 1000 for NEMA TS2 Type 1 and Type 2 operations. Peek says the device builds upon its long-trusted family of traffic controllers and represents the next generation of traffic management based on compliance with the latest NTCIP, NEMA and ATC standards.
  • Tri-nation cooperation on C-ITS Corridor
    June 20, 2016
    In the European C-ITS Corridor project, authorities from three countries are working with the automotive industry on the deployment of Cooperative (V2X) Systems. Cooperative Intelligent Transport Systems/Services (C-ITS) has the potential to improve road safety, transport efficiency and environmentally friendly mobility, as well as creating additional services and new business models. A set of international standards have been developed to provide the technical basis for the deployment of Cooperative ITS.
  • The future of in-vehicle navigation systems
    February 3, 2012
    TRL's Alan Stevens looks at the evolution and future prospects of in-vehicle navigation devices. Human-Machine Interaction (HMI) plays a crucial role in the safety of vehicles on our roads. Until we achieve full automation (and that's a debatable prospect anyway) a driver's interaction with the vehicle - all the controls, information and systems - holds a pivotal role in safe driving.