Skip to main content

TRW takes first step towards lane centring technology

TRW’s latest Lane Keeping Assist (LKA) technology, incorporating closed loop control, has gone into production for the first time on two vehicle platforms for the European market. LKA integrates data from a video camera sensor with electrically powered steering (EPS) to apply a short counter-steer torque via the steering system to assist the driver in preventing the vehicle from unintentionally leaving the lane. In conventional LKA systems, the technology is only active when the vehicle is close to t
December 4, 2013 Read time: 2 mins
TRW’s latest Lane Keeping Assist (LKA) technology, incorporating closed loop control, has gone into production for the first time on two vehicle platforms for the European market.

LKA integrates data from a video camera sensor with electrically powered steering (EPS) to apply a short counter-steer torque via the steering system to assist the driver in preventing the vehicle from unintentionally leaving the lane.

In conventional LKA systems, the technology is only active when the vehicle is close to the lane borders, at which point the counter-steer torque is applied, helping to correct the driving position. TRW says that, with this closed loop version, the steering angle is controlled more closely as the driver is 'coached' to steer the vehicle away from the border back to the centre of the lane. As with all LKA systems, the induced torque generated by the EPS system can be easily over-ridden by the driver at any time.

Andy Whydell, product planning, TRW Electronics commented: "Lane Keeping Assist technology has great potential in helping to improve road safety. According to 2011 834 National Highway Traffic Safety Administration (NHTSA) data, 53 per cent of road fatalities result from a roadway departure, and 7120 Insurance Institute for Highway Safety (IIHS) data estimates that lane departure warning and lane keeping assist systems could save more than 7,500 lives in the USA each year."

"This technology is the first step towards a full lane centring system where the EPS system will help keep the driver in the centre of the lane at all times. Such technologies are starting to form the basis for semi-automated driving functionality," concluded Whydell.

Related Content

  • Next generation safety technologies from Toyota
    October 14, 2013
    Toyota has revealed two new integrated safety systems designed to reduce the risk of pedestrian collisions and deliver safer driving in traffic, both of which will be brought to market in the next few years. Its auto-steering function for its pre-collision system (PCS) works in conjunction with automatic braking to help the driver avoid an impact, while its automated highway driving assist (AHDA) system keeps the car on an optimum driving line and a safe distance from the vehicle in front.
  • Auto safety initiative seeks to reduce driver errors
    December 2, 2013
    A push by the US National Highway Traffic Safety Administration to use technology to reduce traffic fatalities aims to keep drunk drivers off the roads by using in-vehicle technology that immobilises their cars. They are pushing for systems that prevent drivers from starting their cars, help cars avoid collisions and prevent vehicles from starting if the occupants don’t wear seat belts. "Ninety per cent of all crashes have an element of human error," NHTSA administrator David Strickland said. "We really
  • Distraction dominated teen driver accident causes.
    June 3, 2015
    As a new report shows that distracted driving is a bigger cause of accidents than previously thought, Jon Masters asks what should be done to counter this problem. Research carried out by the AAA Foundation for Traffic Safety has shed new light on the dangers of distraction for teen drivers. Six years of study using video analysis has shown that 58% of all crashes involving teen drivers are caused by the driver being distracted and proved that the influence of external factors is stronger than previously th
  • Groups seek electronic collision alert devices on big trucks
    February 20, 2015
    The US Advocates for Highway and Auto Safety, the Truck Safety Coalition, the Center for Auto Safety and Road Safe America have filed a petition with the National Highway Traffic Safety Administration (NHTSA) requesting that the agency initiate rulemaking to require forward collision avoidance and mitigation braking (F-CAM) systems on all new large trucks and buses with a gross vehicle weight rating (GVWR) of 10,000 pounds or more. F-CAM technology uses radar and sensors to first alert the driver and then t