Skip to main content

TRW takes first step towards lane centring technology

TRW’s latest Lane Keeping Assist (LKA) technology, incorporating closed loop control, has gone into production for the first time on two vehicle platforms for the European market. LKA integrates data from a video camera sensor with electrically powered steering (EPS) to apply a short counter-steer torque via the steering system to assist the driver in preventing the vehicle from unintentionally leaving the lane. In conventional LKA systems, the technology is only active when the vehicle is close to t
December 4, 2013 Read time: 2 mins
TRW’s latest Lane Keeping Assist (LKA) technology, incorporating closed loop control, has gone into production for the first time on two vehicle platforms for the European market.

LKA integrates data from a video camera sensor with electrically powered steering (EPS) to apply a short counter-steer torque via the steering system to assist the driver in preventing the vehicle from unintentionally leaving the lane.

In conventional LKA systems, the technology is only active when the vehicle is close to the lane borders, at which point the counter-steer torque is applied, helping to correct the driving position. TRW says that, with this closed loop version, the steering angle is controlled more closely as the driver is 'coached' to steer the vehicle away from the border back to the centre of the lane. As with all LKA systems, the induced torque generated by the EPS system can be easily over-ridden by the driver at any time.

Andy Whydell, product planning, TRW Electronics commented: "Lane Keeping Assist technology has great potential in helping to improve road safety. According to 2011 834 National Highway Traffic Safety Administration (NHTSA) data, 53 per cent of road fatalities result from a roadway departure, and 7120 Insurance Institute for Highway Safety (IIHS) data estimates that lane departure warning and lane keeping assist systems could save more than 7,500 lives in the USA each year."

"This technology is the first step towards a full lane centring system where the EPS system will help keep the driver in the centre of the lane at all times. Such technologies are starting to form the basis for semi-automated driving functionality," concluded Whydell.

Related Content

  • Debating the future of in-vehicle systems
    December 6, 2012
    Industry experts talk to Jason Barnes about the legislative situation of current and future in-vehicle systems. Articles about technology development can have a tendency to reference Moore’s Law with almost indecent regularity and haste but the fact remains that despite predictions of slow-down or plateauing, the pace remains unrelenting. That juxtaposes with a common tendency within the ITS industry: to concentrate on the technology and assume that much else – legislation, business cases and so on – will m
  • Idaho adds human dimension to winter savings
    September 23, 2014
    Idaho leverages the increased capability and reliability of its road weather sensor network to reduce costs and prevent accidents. Weather-related accidents can form a significant chunk of an authorities’ annual road casualty statistics. While authorities cannot control the weather, the technology exists to monitor the road conditions and react with warnings to motorists and the treatment of icy or snow-covered roads. However, with all capital expenditure now placed under the microscope of public scrutiny,
  • Continental concept vehicle addresses distracted driving
    February 8, 2013
    According to the US Department of Transportation (USDOT), an average of ten drivers in the US is killed and more than 1,100 people are injured every day as a result of accidents caused by distracted drivers. To address this ongoing concern, automotive supplier Continental has developed a concept vehicle, the driver focus vehicle, where driver assistance systems are linked to a highly versatile LED light strip to create a powerful tool against driver distraction. In its driver focus vehicle, Continental has
  • Progressing work zone safety systems
    February 1, 2012
    David Crawford investigates progress in a key safety area - work zones. Highway construction zone safety is taken seriously enough in the US to merit a special spring National Work Zone Awareness Week, which in 2010 ran from 19-23 April. Headed by the US Department of Transportation's Federal Highway Administration (FHWA), this aims to reduce an annual toll of work zone deaths - 720 in 2008 (an average of one every 10 hours) with more than 40,000 traffic injuries (an average of one every 13 minutes).