Skip to main content

Subaru debuts improved driver assistance systems

The latest EyeSight driver assistance system from Subaru of America now features colour stereo cameras that deliver an approximately 40 per cent longer and wider detection range, brake light detection and can now fully function when the speed differential between the Eyesight equipped car and another vehicle is up to 30 mph. EyeSight is mounted inside the car on the upper edge of the windshield in a housing that has been made 15 per cent smaller. The EyeSight system processes stereo images to identify t
January 24, 2014 Read time: 2 mins
RSSThe latest EyeSight driver assistance system from 7994 Subaru of America now features colour stereo cameras that deliver an approximately 40 per cent longer and wider detection range, brake light detection and can now fully function when the speed differential between the Eyesight equipped car and another vehicle is up to 30 mph.

EyeSight is mounted inside the car on the upper edge of the windshield in a housing that has been made 15 per cent smaller. The EyeSight system processes stereo images to identify the vehicles travelling in front, as well as obstacles and traffic lanes. The video information is relayed to the EyeSight computer, which is also networked with the car's braking system and electronic accelerator control. EyeSight is also capable of detecting pedestrians in the vehicle's path and can activate in order to mitigate or even avoid the collision.

The system integrates adaptive cruise control, pre-collision braking and vehicle lane departure warning. At relative speeds under 30 mph, EyeSight's pre-collision braking system can detect vehicles in the car's path and, if the driver has not applied the brake, the system can do so to slow the vehicle or bring it to a full stop to help avoid the potential collision.

Lane departure warning monitors traffic lane markers and lines and can detect if the car begins to wander outside the intended lane without a turn signal being used, or begins to sway within the travel lane.

Adaptive cruise control, intended for freeway use, can maintain a safe distance from the vehicle in front, braking or accelerating the car to maintain the driver-selected target speed and travelling distance. The system can fully bring the vehicle to a stop if it locks on to a vehicle ahead and assists the driver in stop-go traffic by maintaining a safe distance.

Also debuting in Subaru models later this year are three additional technologies; blind spot detection, lane change assist and rear cross traffic alert, which will be introduced on Subaru's product line up starting in 2014.

For more information on companies in this article

Related Content

  • Idris paves the way for loop based speed enforcement
    February 1, 2012
    With the Idris system now validated as a speed verification tool, the way is open for loops to be used in more complex enforcement applications. Diamond Consulting Services (DCS), developer of the Idris inductive loop-based vehicle detection and classification system, has recently successfully conducted validation trials which, the company says, open the way for Idris to be used for speed verification and loop-based sensors to be used for more complex applications such as speed-on-green and differential spe
  • The rise and rise of robo-car
    July 23, 2019
    When it comes to driverless cars, there are many variables – but one thing is for certain: autonomous driving will have a significant impact on vehicle design, says Andreas Herrmann The transition to autonomous vehicles (AVs) means that many of the factors which have shaped automotive design for the past 130 years no longer apply. At present, the design of a car is largely determined by the anticipated direction of travel: the car’s silhouette immediately shows where the front and back are. Driverless ve
  • Ramp metering delivers - again
    January 27, 2012
    Though still controversial, ramp metering, which has been around for nearly 50 years, continues to deliver substantial benefits, and generally for relatively small cost. Kansas City is a case in point. In March 2010, Kansas City Scout, a partnership between the Missouri and Kansas Departments of Transportation to provide ITS for the greater Kansas City Area, activated the first ramp metering system in the region. The project is located on an 8.85km (5.5 mile) section of Interstate 435 from Metcalf Avenue to