Skip to main content

Scania tests truck platooning

Dutch Infrastructure and Environment Minister Melanie Schultz van Haegen, along with representatives of the European Commission, recently took part in test drive of truck platooning on the A28 in the Netherlands. The convoy consisted of three Scania R500 Streamline trucks; the steering was done by truck drivers, but speed and braking were controlled by the front truck using wi-fi technology. The plan is to have fully self driving trucks in the future. This method of coupled drive, based on adaptive cr
February 11, 2015 Read time: 2 mins
RSS

Dutch Infrastructure and Environment Minister Melanie Schultz van Haegen, along with representatives of the 1690 European Commission, recently took part in test drive of truck platooning on the A28 in the Netherlands.

The convoy consisted of three 570 Scania R500 Streamline trucks; the steering was done by truck drivers, but speed and braking were controlled by the front truck using wi-fi technology. The plan is to have fully self driving trucks in the future.

This method of coupled drive, based on adaptive cruise control, provides significant fuel savings. "With two second gap it is possible to save five per cent of diesel per truck. That is significant especially when you consider that fuel costs are 27 per cent of the total cost of transport." suggested Lars- Gunnar Hedström, head of product development at Scania. According to Hedstrom, another advantage of platooning is a reduction in traffic congestion. "Because trucks driving close to each other, there may be more cars on the road. The traffic flow is better, with less congestion.”

Dutch laws and regulations will have to be changed to allow full scale testing of self-driving trucks and vehicles, but Minister Schultz was positive about platooning and suggested that the Netherlands should take a leading role. "Self-propelled vehicles offer great opportunities to make our mobility easier, safer and cleaner, it is important that we learn by doing. She called on manufacturers, research institutes and governments to consult with each other to promote the development of self-propelled vehicles in Europe.

For more information on companies in this article

Related Content

  • Will standardisation increase ITS interoperability?
    February 1, 2012
    Theoretical balance Kallistratos Dionelis, secretary general of ASECAP, comments on the European Commission's new ICT Standardisation Work Programme. I've just read a proposal from the European Commission on the 2010-2013 ICT Standardisation Work Programme. As ASECAP Secretary General this is one of my responsibilities. I work to receive information, to disseminate information and to build bridges and mutual understanding between policy-makers and the industrial world, between ASECAP and others.
  • Ignoring deadly defects in autonomous cars serves no one, say auto safety advocates
    July 29, 2016
    The US Center for Auto Safety, Consumer Watchdog and former National Highway Traffic Administration (NHTSA) administrator Joan Claybrook have told NHTSA administrator Mark Rosekind that "you inexcusably are rushing full speed ahead" to promote the deployment of self-driving robot car technology instead of developing adequate safety standards "crucial to ensuring imperfect technologies do not kill people by being introduced into vehicles before the technology matures." In a letter to Rosekind in response
  • In-vehicle intersection violation Warning system
    January 31, 2012
    Mike Schagrin, ITS Joint Program Office, RITA, and John Harding, NHTSA, describe US progress towards an in-vehicle Intersection Violation Warning system. In 2008, there were 37,261 fatalities on US roadways. Of these, 7,772, some 20.8 per cent of the total, were defined as intersection crashes or intersection-related crashes. Through a multi-agency research initiative led by the Research and Innovative Technology Administration (RITA), the US Department of Transportation (USDOT) has developed a prototype In
  • Developing an integrated WIM/ANPR enforcement system
    July 31, 2012
    The weigh in motion market remains especially buoyant and technological development continues to reflect this. Although there are major differences in operating philosophies, particularly between developed and developing countries, both the numbers of countries using Weigh In Motion (WIM) technology and the numbers of systems that they deploy are on the increase.