Skip to main content

Daimler launches its ‘bus of the future’

Daimler’s Mercedes-Benz Future Bus made its first autonomous trip on a public road recently, when it was driven at speeds of up to 70 km/h on a section of a bus rapid transit route in Amsterdam in the Netherlands. The 20 kilometre route, which links Schiphol Airport with the town of Haarlem, provided a challenge for the bus, with its numerous bends, tunnels and traffic signals. Although a driver was on board for safety reasons, for the most part the bus met the challenge autonomously, stopping at bus sto
July 21, 2016 Read time: 2 mins
2069 Daimler’s Mercedes-Benz Future Bus made its first autonomous trip on a public road recently, when it was driven at speeds of up to 70 km/h on a section of a bus rapid transit route in Amsterdam in the Netherlands.

The 20 kilometre route, which links Schiphol Airport with the town of Haarlem, provided a challenge for the bus, with its numerous bends, tunnels and traffic signals. Although a driver was on board for safety reasons, for the most part the bus met the challenge autonomously, stopping at bus stops and traffic lights and driving off again automatically, passing through tunnels, braking for obstacles or pedestrians and communicating with traffic signals.

The bus utilises CityPilot technology, which is based on Daimler’s autonomous Mercedes-Benz Actros truck with Highway Pilot. This enables it to recognise obstacles or pedestrians. It is also able to recognise traffic lights, communicate with them and safely negotiate signal-controlled junctions. It approaches bus stops automatically, where it opens and closes its doors.

The bus features GPS for precise positioning and uses around a dozen cameras to scan the road and surroundings, while long and short-range radar systems constantly monitor the route ahead, providing data which enables the bus to be precisely positioned to within centimetres, says Daimler.  

The interior of the bus features three different areas for passengers depending on their length of travel, with grab rails for short trips and a lounge with designer seats and wireless charging for long-distance passengers. Large monitors display travel information or even the view from the driver’s window.

According to Daimler, the bus is ideal for BRT systems, which tend to run on their own lines with separate, barrier-free bus stops, their own traffic signal settings and special ticketing systems with advance sale of tickets.

Related Content

  • February 3, 2012
    Telematics PC for in-vehicle digital signage applications
    Nexcom has expanded its range of in-vehicle PCs with the launch of the VTC 6100, an intelligent yet rugged telematics PC which is ideal for in-vehicle digital signage and infotainment applications within buses, trains and taxis.
  • October 10, 2016
    Smart road layout with Lindsay’s Road Zipper
    Lindsay Transportation Solutions is focusing on its Road Zipper system for ITS applications. This moveable barrier system quickly reconfigures the road to mitigate congestion, while providing positive barrier protection between opposing lanes of traffic.
  • April 26, 2013
    ITS asset management matters
    Maintenance of on-road ITS kit needs to become more sophisticated; while new technologies can deliver better road maintenance. David Crawford investigates both sides of the issue "Good information is key to effective ITS asset maintenance,” says Ian Routledge of the Ian Routledge Consultancy (IRC), whose Imtrac (Information Management for TRAffic Control) system is poised for European expansion. Developed as an ‘intelligent filing cabinet’ for storing information about on-road equipment, the online database
  • September 7, 2016
    Road Zipper focus for Lindsay
    Lindsay Transportation Solutions will attend the 2016 ITS World Congress Melbourne with a focus on the Road Zipper system for ITS applications. A moveable barrier system that quickly reconfigures the road to mitigate congestion, while providing positive barrier protection between opposing lanes of traffic, it can be used to create flexible bus rapid transit (BRT) corridors that can be returned to traffic during non-commute periods to maximize the full use of the roadway.