Skip to main content

Continental focuses on automated truck convoys

Technology company Continental is developing components and systems for the series launch of the electronic towbar, or platooning, using on an interoperable internet platform, which trucks from different manufacturers and fleet operators can use to form an electronic convoy on the freeway. Braking and sensor data are transmitted wirelessly from the lead vehicle to the following vehicles.
September 5, 2016 Read time: 2 mins

Technology company 260 Continental is developing components and systems for the series launch of the electronic towbar, or platooning, using on an interoperable internet platform, which trucks from different manufacturers and fleet operators can use to form an electronic convoy on the freeway. Braking and sensor data are transmitted wirelessly from the lead vehicle to the following vehicles.
 
Continental forecasts that it will be possible to initially reduce the distance between vehicles from 50 to15 metres at a speed of 80 km/h. Its development experts even predict that, in the long term, it will be technically possible to safely reduce this distance to only 10 metres.
 
Drivers in the convoy are supported by automated driving systems. As a first step, Continental is working on the technology for highly automated convoys comprising a lead truck being followed by one or two additional trucks using the electronic towbar.
 
According to Dr Michael Ruf, head of continental’s Commercial Vehicles and Aftermarket, platooning means that the truck, which is electronically coupled to the lead vehicle, consumes up to 15 per cent less fuel thanks to safe slipstreaming. Even the lead vehicle drives up to three percent more efficiently on account of the reduction in air turbulence, he says.
 
Continental believes that if only 50 per cent of the annual mileage of a truck, totalling 150,000 km, was driven in convoy, every coupled truck would be able to save 4,000 litres of diesel per year. One of these convoys would reduce annual fuel costs by over US$10,000 (€9,000) per year and enable the fleet operator to reduce its CO2 emissions by 24 kg per hour with a convoy of three trucks.

Related Content

  • October 29, 2015
    Counting the environmental costs of ITS deployment
    David Crawford looks at the latest thinking about calculating the benefits associated with the environmental side of ITS schemes. The penny is dropping that some environmental costs “are being shifted outside the traditional bounds of evaluation methods” for ITS-based road transport projects, according to researchers at the UK University of Leeds’ Institute for Transport Studies.
  • November 21, 2022
    €7.2bn 'green' upgrade for Italian motorway
    The A22 between Modena and Bolzano will offer hydrogen filling and EV charging
  • January 24, 2012
    In-vehicle automation of safety compliance and other traffic violations
    David Crawford explores new initiatives in enforcement. Achieving the EU’s new road safety target of reducing road traffic deaths by 50 per cent by 2020 depends on removing legal and institutional barriers to the deployment of new enforcement technologies, stresses Jan Malenstein. The senior ITS Adviser to Dutch National Police Agency the KLPD, and a European-level spokesperson on road and traffic safety, points to the importance of, among other requirements, an effective EUwide type approval process for fr
  • April 20, 2016
    Countering falling fuel tax revenue with mileage fees
    Eric G. O’Rear and Wallace E. Tyner look at the benefits of mileage charges and how these might be implemented. Since the early 1900s, taxes on petrol (gasoline) and diesel fuels have been used to finance the construction and maintenance of roadway infrastructure and, in some countries other government spending too. Now, a combination of improved fuel economy, the advent of hybrid and alternative fuelled vehicles and a reluctance in some countries (especially the US) to increase fuel taxes has led to a d