Skip to main content

AAA camera research finds 46 per cent improvement in blind-zone visibility

Tests carried out by the American Automobile Association (AAA) on rear-view camera systems found that they improved rear visibility an average of 46 per cent. These systems are intended to improve driver awareness of the area immediately behind the vehicle in order to reduce the instance of back-over fatalities. The National Highway Traffic Safety Administration requires a rear-view image in all passenger vehicles beginning in 2016, with full compliance by May 2018. In conjunction with the Automobile Clu
October 31, 2014 Read time: 2 mins
Tests carried out by the 1765 American Automobile Association (AAA) on rear-view camera systems found that they improved rear visibility an average of 46 per cent. These systems are intended to improve driver awareness of the area immediately behind the vehicle in order to reduce the instance of back-over fatalities. The 834 National Highway Traffic Safety Administration requires a rear-view image in all passenger vehicles beginning in 2016, with full compliance by May 2018.

In conjunction with the Automobile Club of Southern California’s Automotive Research Center, the AAA evaluated 17 vehicles from11 manufacturers with factory-installed and aftermarket rear-view camera systems on a variety of vehicle body styles. The increased visibility ranged from a 36 per cent improvement in smaller sedans to a 75 per cent improvement in hatchbacks. Large trucks and sport utility vehicles scored in the mid-range of vehicles evaluated.

“Rear-view cameras are a great supplement for drivers,” says John Nielsen, AAA’s managing director of Automotive Engineering. “Cameras don’t replace the need to check around your vehicle for obstacles before getting in to back up, but they do dramatically improve rear visibility. These systems are especially helpful for viewing the first 10 feet behind the vehicle, which are the most hazardous in terms of back-over risk for young children.”

Although these systems dramatically improve rear-view visibility, they do not show 100 percent of the space behind the vehicle. AAA recommends drivers always walk behind their vehicle to visually confirm that there are no obstacles, and use the rear-view camera to confirm that nothing has entered the area immediately behind the vehicle since the driver’s walk-through inspection.

Rain, snow or slush can cloud the rear-view camera lens, delivering blurry imagery. Motorists will need to resort to manual methods of confirming that the rear blind zone is clear during inclement weather. Wiping the camera during the pre-drive inspection is a good habit that ensures the camera is ready to capture a clear image.

All of the systems tested met – and many exceeded – the minimum specifications for image quality per the NHTSA guideline.

Related Content

  • October 22, 2013
    Too safe for safety’s sake
    In-vehicle systems are making huge advances in vehicle safety with the introduction of ABS, collision avoidance, adaptive cruise control, lane departure alert and blind spot warning… the list goes on. But at the same time accidents are still happening and arguably getting bigger. A look at a list of multi-vehicle (30 - 300) accidents across Europe, North and South America and parts of the Middle East shows that the trend is increasing with 2013 already having witnessed seven such incidents – three of which
  • January 30, 2012
    Selecting the right camera for safety or security
    Machine vision systems offer great variety of function and performance. Teledyne DALSA product manager Manuel Romero describes 10 key criteria to aid selection of advanced camera technology for safety or security applications. There are many ways in which machine vision systems can enhance safety and security in transportation, but the ultimate results will only be as good as the image produced. Success relies on correct selection of the camera of such systems, as the features and performance required vary
  • March 18, 2014
    Vehicle mounted camera detects pedestrians, aids safety
    The Blaxtair construction machine-mounted vision-based alert system distinguishes pedestrians from other objects, providing a visual/audible alarm to both driver and pedestrian when a person is in a position of danger. The intelligent camera system, from French company Arcure, is an obstacle detection device and pedestrian recognition equipment. It is capable of detecting all types of obstacles, locating them precisely with respect to the machine and determining whether an obstacle is a pedestrian or not.
  • February 1, 2012
    Advanced in-vehicle user interface - future developments
    Dave McNamara and Craig Simonds, Autotechinsider LLC, look at human-machine interface development out to 2015. The US auto industry is going through the worst crisis it has faced since the Great Depression. But it has embraced technologies that will produce the best-possible driving experience for the public. Ford was the first OEM to announce in-car internet radio and SYNC, its signature-branded User Interface (UI), is held up as the shining example of change embracement.