Skip to main content

AAA camera research finds 46 per cent improvement in blind-zone visibility

Tests carried out by the American Automobile Association (AAA) on rear-view camera systems found that they improved rear visibility an average of 46 per cent. These systems are intended to improve driver awareness of the area immediately behind the vehicle in order to reduce the instance of back-over fatalities. The National Highway Traffic Safety Administration requires a rear-view image in all passenger vehicles beginning in 2016, with full compliance by May 2018. In conjunction with the Automobile Clu
October 31, 2014 Read time: 2 mins
Tests carried out by the 1765 American Automobile Association (AAA) on rear-view camera systems found that they improved rear visibility an average of 46 per cent. These systems are intended to improve driver awareness of the area immediately behind the vehicle in order to reduce the instance of back-over fatalities. The 834 National Highway Traffic Safety Administration requires a rear-view image in all passenger vehicles beginning in 2016, with full compliance by May 2018.

In conjunction with the Automobile Club of Southern California’s Automotive Research Center, the AAA evaluated 17 vehicles from11 manufacturers with factory-installed and aftermarket rear-view camera systems on a variety of vehicle body styles. The increased visibility ranged from a 36 per cent improvement in smaller sedans to a 75 per cent improvement in hatchbacks. Large trucks and sport utility vehicles scored in the mid-range of vehicles evaluated.

“Rear-view cameras are a great supplement for drivers,” says John Nielsen, AAA’s managing director of Automotive Engineering. “Cameras don’t replace the need to check around your vehicle for obstacles before getting in to back up, but they do dramatically improve rear visibility. These systems are especially helpful for viewing the first 10 feet behind the vehicle, which are the most hazardous in terms of back-over risk for young children.”

Although these systems dramatically improve rear-view visibility, they do not show 100 percent of the space behind the vehicle. AAA recommends drivers always walk behind their vehicle to visually confirm that there are no obstacles, and use the rear-view camera to confirm that nothing has entered the area immediately behind the vehicle since the driver’s walk-through inspection.

Rain, snow or slush can cloud the rear-view camera lens, delivering blurry imagery. Motorists will need to resort to manual methods of confirming that the rear blind zone is clear during inclement weather. Wiping the camera during the pre-drive inspection is a good habit that ensures the camera is ready to capture a clear image.

All of the systems tested met – and many exceeded – the minimum specifications for image quality per the NHTSA guideline.

Related Content

  • RedSpeed offers schools automated no-cost stop arm enforcement
    March 28, 2014
    School authorities in the US are turning to automated school bus stop arm enforcement to curb an astonishing number of violations. It is estimated that every year nearly 17,000 American children are sent to emergency rooms as a result of school bus related crashes. And when surveyed, 99% of school bus drivers reported that the most dangerous behaviour they encounter is drivers passing a school bus with its stop sign arm extended. Every day these drivers who violate the extended stop arm signs put at risk
  • US DoT launches largest-ever road test of connected vehicle crash avoidance technology
    August 22, 2012
    Nearly 3,000 cars, trucks and buses equipped with connected Wi-Fi technology to enable vehicles and infrastructure to ‘talk’ to each other in real time to help avoid crashes and improve traffic flow, began traversing Ann Arbor's streets yesterday as part of a year-long safety pilot project by the US Department of Transportation. Ray LaHood, US Transportation Secretary, joined elected officials and industry and community leaders on the University of Michigan campus to launch the second phase of the Safety Pi
  • With C-ITS we can get ourselves connected
    June 27, 2025
    Workzones need to be safer for drivers and workers – and the technology exists to harmonise safety with mobility needs, says Swarco’s Daniel Lenczowski
  • Survey finds varied autonomy and safety technology preferences for new vehicles
    August 4, 2017
    New research on consumer preferences for full autonomy in new vehicles finds the technology is not yet popular among a broad audience, according to analysts at IHS Markit. Ironically, the same audience ranked it among the very features they would be willing to pay the most for in their next new vehicle purchase. Blind spot detection ranked highest as the most desired features among all audiences, young and old, and propensity to pay for it varied by region, with the US respondents reporting they would be wi