Skip to main content

Turning 4G mobile phones into multi-protocol transponders

GeoToll, a new product that promises to turn the newest generation 4G mobile phones into a multi-protocol toll transponder is about to be launched in the US. OmniAir founder and president Tim McGuckin is leaving the interoperability standards cooperative to run GeoToll as its first chief executive officer. The device will be multi-protocol, so it will be usable on any toll system in North America, to the extent they can handle patent issues with licensing or open standards. GeoToll hopes to trial the devic
March 26, 2013 Read time: 3 mins
GeoToll, a new product that promises to turn the newest generation 4G mobile phones into a multi-protocol toll transponder is about to be launched in the US.  808 OmniAir founder and president Tim McGuckin is leaving the interoperability standards cooperative to run GeoToll as its first chief executive officer.

The device will be multi-protocol, so it will be usable on any toll system in North America, to the extent they can handle patent issues with licensing or open standards.

GeoToll hopes to trial the devices with open standard 6C protocols as soon as this summer with volunteer customers of a toll authority.  Adding E-ZPass-IAG capability could be next, and California's Title 21 and ATA could also be adopted. 139 Transcore 6B+ tags are more problematic because that company's SeGo protocols are still proprietary, although TransCore could licence use of their protocols.

National interoperability is likely to involve open standards and proprietary standards.

Says Tim McGuckin: "GeoToll will work with protocols that it has the licence to build to. If a toll operator wanted it and the supplier licenced it, then Geotoll can build it."

The system is mostly a software app but it will need a sticker or jacket to attach to the cell phone to provide the RF and antenna for the 915MHz wireless signaling used by toll transponders.  Like other mobile apps and operating systems regular updates can be sent to users wirelessly.

GeoToll will use an active DSRC system to improve its readability from gantry equipment even with passive systems like 6C, T21, and ATA.

Unlike a transponder which has a specific place on the windshield, the GeoToll device will ideally be readable in a pocket or handbag or parked for the trip on a vehicle shelf or compartment as mobile phones are. An advantage of having the unit built around a mobile phone is that has a power supply much larger than transponders.

It will sense signal power needed and be able to amplify signals to read through clothing and bags, and in remote parts of the vehicle, wherever a motorists might have their mobile phone.

The device still has to be tested and proven with a large number of real drivers in real traffic. To start with the GeoToll device will most likely be tested with instructions to drivers to place the mobile phone on the dash.

GeoToll will make use of the new generation mobile devices' Bluetooth near-field communications and their ability to tap a variety of location technologies - GPS, and triangulation and distance-to-tower measurements of cell phones that give them stronger positioning than GPS alone.

Constant location awareness will enable the device to refer to a digital map of toll points and conserve battery life by only going into active mode when approaching a toll point and shutting down DSRC when exiting the vicinity of the toll point.

Jim Eden president and CEO of the Alliance for Toll Interoperability commented: "Tim has done a great job with Omni-Air in particular in starting a viable testing entity. We will all miss his leadership here.  GeoToll will be one of several multi-protocol technologies that I have heard will be tested over the next year or so. It is good to hear that they will be working with toll agencies during their development.  The transition requirements, customer acceptance, cost and potential business rule changes will determine what technologies take on."

Related Content

  • June 26, 2018
    OmniAir certifies two Star Systems International tolling devices
    Tulsa-based OmniAir Consortium has certified two devices for tolling interoperability from Star Systems International (SSI). The Vektra Windshield Sticker Tag and Solana Passive Transponder can be mounted on either a vehicle’s windscreen or headlamp. SSI supplies passive tolling devices across the world and to members of the 6C Toll Operators Coalition as well as other tolling operators within the US. Stephen Lockhart, CTO for SSI, said: “Star Systems International is committed to bringing the best
  • February 9, 2018
    OmniAir certifies two Star Systems International tolling devices
    Tulsa-based OmniAir consortium has certified two devices for tolling interoperability from Star Systems International (SSI). The Vektra Windshield Sticker Tag and Solana Passive Transponder can be mounted on either a vehicle’s windscreen or headlamp. SSI supplies passive tolling devices across the world and to members of the 6C Toll Operators Coalition as well as other tolling operators within the United States. Stephen Lockhart, CTO, for SSI, said: “Star Systems International is committed to bringing
  • February 11, 2013
    Confidex awarded OCS certification for 6C RFID tag
    Confidex, Finland-based supplier of specialty RFID tags, has been awarded OCS certification for its 6C RFID windshield tag by OmniAir Certification Services (OCS), the test-affiliate of OmniAir Consortium, a technology-focused member association created to enable the deployment of interoperable advanced transportation technologies and applications. OCS certification positions Confidex as a certified, high-quality, high-volume RFID tag provider for the North American electronic toll collection market. The Co
  • September 11, 2012
    Tolling interoperability certification awards issued
    OmniAir Certification Services (OCS) has granted 3M the first OmniAir certified awards for products tested in its 6C-for-Tolling Certification Program, to be presented at 80th IBTTA Annual Meeting in Orlando, Florida on 10 September 2012. Based on the ISO/IEC 18000-6 (Type C) RFID protocol, the 6C certification program is designed to ensure tolling tag and reader interoperability (IOP) across equipment vendors and toll facilities that choose to deploy equipment certified as compliant to the 6C requirements