Skip to main content

Turkish ferry crossing uses electronic toll collection

Turkey-based tolling specialist Aselsan has deployed its electronic toll collection technology for Izmit Bay Car Ferry, on the Marmara Sea.
February 1, 2012 Read time: 2 mins
Turkey-based tolling specialist 19 Aselsan has deployed its electronic toll collection technology for Izmit Bay Car Ferry, on the Marmara Sea. An important route connecting Istanbul to southern destinations, some 10,000 vehicles use the ferry during weekdays, and up to 17,000 at weekends, to avoid a 150km motorway journey around the bay. Ferry frequency in each direction is every 20 minutes, 24 hours a day.

The Aselsan deployment involves an open tolling system on two ferry stations where vehicles are tolled based on their length and height on the first axle. This method is preferred because it classifies vehicles according to the surface area they occupy on the ferry. In this classification scheme, vehicle length is measured as the distance between the first axle and the tail of the vehicle, using a series of axle detectors and an optical barrier.

A total of six toll lanes on two stations are controlled by a remote centre. At each station there are two cash lanes and one cash/card hybrid lane. Toll payment uses cash or Turkey's national toll system card, the KGS.

The ferry tolling system also counts the number of vehicles transported by each ferry. For this, the lane system produces a barcoded ticket with vehicle specific information which is read as vehicles move onto a ferry from the parking area. The statistical information generated for each ferry helps to plan for an efficient operation.

Since the ferry operator has several other ferry stations around the Marmara Sea, the system was designed to enable future expansions.

For more information on companies in this article

Related Content

  • IRD polishes WiM’s green credentials
    December 21, 2020
    A project in Canada is proving that Weigh in Motion can have a positive environmental impact, by helping to reduce emissions. Adam Hill looks at International Road Dynamics’ numbers
  • Groups seek electronic collision alert devices on big trucks
    February 20, 2015
    The US Advocates for Highway and Auto Safety, the Truck Safety Coalition, the Center for Auto Safety and Road Safe America have filed a petition with the National Highway Traffic Safety Administration (NHTSA) requesting that the agency initiate rulemaking to require forward collision avoidance and mitigation braking (F-CAM) systems on all new large trucks and buses with a gross vehicle weight rating (GVWR) of 10,000 pounds or more. F-CAM technology uses radar and sensors to first alert the driver and then t
  • Machine vision offers new solutions to old problems
    October 28, 2014
    The transportation sector is set to benefit from a far wider range of machine vision technology. While machine vision techniques have been applied to traffic management applications for some years, in some areas there can still be a shortage of knowledge about what the technology can offer transportation professionals. The image processing and interpretation functions of machine vision enables control room staff to be immediately alerted to occurrences requiring attention which, in turn, enables each person
  • Conduent advances Flanders fare system
    August 14, 2020
    Payment is now contactless on De Lijn network serving 6.5 million Flemish residents