Skip to main content

Turkish ferry crossing uses electronic toll collection

Turkey-based tolling specialist Aselsan has deployed its electronic toll collection technology for Izmit Bay Car Ferry, on the Marmara Sea.
February 1, 2012 Read time: 2 mins
Turkey-based tolling specialist 19 Aselsan has deployed its electronic toll collection technology for Izmit Bay Car Ferry, on the Marmara Sea. An important route connecting Istanbul to southern destinations, some 10,000 vehicles use the ferry during weekdays, and up to 17,000 at weekends, to avoid a 150km motorway journey around the bay. Ferry frequency in each direction is every 20 minutes, 24 hours a day.

The Aselsan deployment involves an open tolling system on two ferry stations where vehicles are tolled based on their length and height on the first axle. This method is preferred because it classifies vehicles according to the surface area they occupy on the ferry. In this classification scheme, vehicle length is measured as the distance between the first axle and the tail of the vehicle, using a series of axle detectors and an optical barrier.

A total of six toll lanes on two stations are controlled by a remote centre. At each station there are two cash lanes and one cash/card hybrid lane. Toll payment uses cash or Turkey's national toll system card, the KGS.

The ferry tolling system also counts the number of vehicles transported by each ferry. For this, the lane system produces a barcoded ticket with vehicle specific information which is read as vehicles move onto a ferry from the parking area. The statistical information generated for each ferry helps to plan for an efficient operation.

Since the ferry operator has several other ferry stations around the Marmara Sea, the system was designed to enable future expansions.

For more information on companies in this article

Related Content

  • Preparations building for French national truck toll
    September 12, 2012
    The Autostrade led Ecomouv consortium is developing the next big system of truck tolling likely to be introduced in Europe – France’s ‘Eco-tax’. Jon Masters reports. Since October last year, a consortium of companies has been working on developing the technological and administrative systems necessary for a national system of truck tolling in France. Eco-tax, France’s truck toll, is not necessarily going to be implemented. The Ecomouv consortium has been set up as a long term concessionaire, but so far only
  • EETS: still struggling to become reality
    December 4, 2013
    Erich Erker, Norbert Schindler, Peter Tschulik from Siemens Electronic Tolling examine the barriers to EETS deployment. Tolling in Europe was introduced to pay for the construction and operation of individual tunnels, bridges and highways and has evolved in major steps. The original manual tolling systems were highly disruptive to traffic flow and required the creation of large toll plazas, with multiple lanes and toll booths to ensure an acceptable throughput. With the introduction of Dedicated Short Range
  • Traffic to flow freely over world’s widest bridge
    November 13, 2012
    Pete Goldin reports on a new Egis project in Canada, providing open road tolling operations for the widest bridge in the world. A bridge can present a bottleneck in a system of roads or it can support the smooth and unobstructed flow of traffic. Much depends on the bridge design, surrounding infrastructure and tolling system. By adding lanes and deploying open road tolling (ORT), the new Port Mann Bridge located in the metropolitan Vancouver area in British Columbia, will alleviate congestion at one of the
  • Increasing and improving disabled access to public transport
    January 25, 2012
    An overview of European efforts to increase disabled access to public transport, by David Crawford