Skip to main content

Turkish ferry crossing uses electronic toll collection

Turkey-based tolling specialist Aselsan has deployed its electronic toll collection technology for Izmit Bay Car Ferry, on the Marmara Sea.
February 1, 2012 Read time: 2 mins
Turkey-based tolling specialist 19 Aselsan has deployed its electronic toll collection technology for Izmit Bay Car Ferry, on the Marmara Sea. An important route connecting Istanbul to southern destinations, some 10,000 vehicles use the ferry during weekdays, and up to 17,000 at weekends, to avoid a 150km motorway journey around the bay. Ferry frequency in each direction is every 20 minutes, 24 hours a day.

The Aselsan deployment involves an open tolling system on two ferry stations where vehicles are tolled based on their length and height on the first axle. This method is preferred because it classifies vehicles according to the surface area they occupy on the ferry. In this classification scheme, vehicle length is measured as the distance between the first axle and the tail of the vehicle, using a series of axle detectors and an optical barrier.

A total of six toll lanes on two stations are controlled by a remote centre. At each station there are two cash lanes and one cash/card hybrid lane. Toll payment uses cash or Turkey's national toll system card, the KGS.

The ferry tolling system also counts the number of vehicles transported by each ferry. For this, the lane system produces a barcoded ticket with vehicle specific information which is read as vehicles move onto a ferry from the parking area. The statistical information generated for each ferry helps to plan for an efficient operation.

Since the ferry operator has several other ferry stations around the Marmara Sea, the system was designed to enable future expansions.

For more information on companies in this article

Related Content

  • Mounting benefits of dynamic tolling project
    January 30, 2012
    Wisconsin's four-year HOT lanes pilot project, launched in May 2008, cost US$18.8 million to construct. Halfway into the project, which uses variably priced, or dynamic, tolling to improve highway efficiency, the benefits are mounting. The problem was obvious, and frustrating, to anyone who ever sat in bumper-to-bumper traffic on State Route 167 and watched a lone car whiz by every 20 seconds or so in the carpool lane. But for planners at the Washington State Department of Transportation, the conundrum was
  • HOV lanes are Paris Olympics legacy
    November 28, 2024
    There’s a new high-occupancy vehicle lane on the Paris Périphérique: Francois Leblanc of Fareco tells Adam Hill about winning the race to put this technology in place
  • Keeping over-height and overheating vehicles out of tunnels
    October 7, 2013
    A review of pre-warning solutions for problematic commercial vehicles approaching tunnels
  • Cross Zlin’s optical sensors increase options for WIM
    March 20, 2018
    Having won the 2016 Intertraffic Innovation Award, Cross Zlin is back again with a host of new products including a shortlisted fibre-optic based weigh-in-motion system called OptiWim. Marketing manager Libor Sušil describes the system as weigh-in-free-flow as it measures the axle across the full lane width regardless of the position of the wheels and the sensor can also detect underinflated tyres even on twin wheel configurations. He likens the measuring method to that of a strain gauge but adds that th