Skip to main content

Taiwan to go all-electronic free flow tolling

Taiwan’s 900 kilometres of toll roads will transition to all-electronic free flow operations early next year. The roads, which include three north-south routes with 22 toll points, carry out around 1.7 million transactions a day, generating some US$700 million of annual toll revenue. Private contractor Far Eastern Electronic Toll Collection Company (FETC), under contract to the National Freeway Bureau to collect the tolls, says that the IR-based toll system worked well and some 43 per cent of transactio
November 28, 2013 Read time: 3 mins
Taiwan’s 900 kilometres of toll roads will transition to all-electronic free flow operations early next year.  The roads, which include three north-south routes with 22 toll points, carry out around 1.7 million transactions a day, generating some US$700 million of annual toll revenue.

Private contractor Far Eastern Electronic toll Collection Company (FETC), under contract to the 4974 National Freeway Bureau to collect the tolls, says that the IR-based toll system worked well and some 43 per cent of transactions were by IR transponder at roll-through speeds, with around 57 per cent manual transactions, either cash or pre-purchased discounted tickets.

FETC judged the most economical way to go all-electronic and get a very high percentage of motorists with transponder accounts was to transition to a tag that could be given away, hence the adoption of ISO 18000 6C sticker tags, or eTags.

FETC began giving away the eTags in May 2012 when they ceased issuing new IR transponders and they were ready with 6C readers in all the DSRC lanes of the old toll plazas. They have been taking tolls for the past eighteen months with the 43 Efkon IR readers and the 3M 6C readers working side by side in their toll lanes.

In that time, five million 6C tags have been distributed and manual toll collection is down from 57 per cent to 15 per cent (85 per cent are IR or 6C transactions.) The number of IR OBUs in use has declined from 1.2 million to about 200,000. Manual transactions should be down to around close to 10 per cent by the time they are ready to open the new all-electronic gantries.

FETC is its own system integrator for the project to transition to all-electronic. A new schedule of distance-based toll rates is being used so they have developed a new back office to serve 22 mainline AET toll points covering some 319 lanes including shoulders.

The AET free flow system is built around the 3M-5204 6C readers, JAI cameras with lasers from sick doing vehicle detection, tracking and classification.

On transition day, yet to be announced but planned for January to March 2014, the equipment in all the country’s existing mix of IR/6C and manual toll plazas will be switched off and demolition of canopies, booths and islands will begin. The separate gantry based 6C-only/video system will go live and take over toll collection immediately.

Related Content

  • August 14, 2014
    Raytheon to convert Massachusetts to AET
    The Massachusetts Department of Transportation awarded Raytheon Company a US$130 million contract for an all electronic tolling system (AET). Raytheon and a team of Massachusetts-based companies will convert and replace all manual cash and electronic toll collection systems with an advanced system that will automatically toll vehicles as they pass under a gantry similar to an overhead sign. Drivers will be able to pass through the toll station at highway speeds without the need to slow down or stop. Ray
  • January 20, 2012
    Tags or communication based toll payment systems?
    Midland Expressway Ltd's Tom Fanning discusses deployment of Near Field Communicationbased payment on the M6 Toll facility The M6 Toll's introduction from early next year of Near Field Communication (NFC) is a pragmatic response to the relative scarcity of tolled facilities and the concomitant low levels of tag take-up in the UK, according to the road's operator, Midland Expressway Ltd (MEL). Nevertheless, Dedicated Short-Range Communication (DSRC)-based tags operating at 5.8GHz are still a key part of the
  • January 30, 2012
    Open road tolling: safer with less congestion
    Michael J. Davis of PBS&J looks at the positive effect that open road tolling can have on safety
  • September 11, 2012
    Tolling interoperability certification awards issued
    OmniAir Certification Services (OCS) has granted 3M the first OmniAir certified awards for products tested in its 6C-for-Tolling Certification Program, to be presented at 80th IBTTA Annual Meeting in Orlando, Florida on 10 September 2012. Based on the ISO/IEC 18000-6 (Type C) RFID protocol, the 6C certification program is designed to ensure tolling tag and reader interoperability (IOP) across equipment vendors and toll facilities that choose to deploy equipment certified as compliant to the 6C requirements