Skip to main content

FTA calls for greater reliability on road network following improvements at Dartford

Drivers using the Dartford Crossing at peak times are saving around an hour and a half every week thanks to Dart Charge, according to Highways England. New figures released by Highways England show that journeys over the Dartford Crossing, which cost £62million (US$95 million) to convert to free-flow tolling, are up to 56 per cent faster than before payment barriers were removed. Drivers at peak times save up to 14 minutes southbound and seven minutes northbound.
October 14, 2015 Read time: 3 mins
FTA calls for greater reliability on road network following improvements at Dartford

Drivers using the Dartford Crossing at peak times are saving around an hour and a half every week thanks to Dart Charge, according to 8101 Highways England.

New figures released by Highways England show that journeys over the Dartford Crossing, which cost £62million (US$95 million) to convert to free-flow tolling, are up to 56 per cent faster than before payment barriers were removed. Drivers at peak times save up to 14 minutes southbound and seven minutes northbound.

Spread across the day, the average time savings are seven and a half minutes southbound and three and a half minutes northbound. The improvements have been achieved despite traffic volumes at the crossing growing by around 4 per cent, with up to 157,000 crossings being made every day in July, around 20,000 over the Crossing’s design capacity.

Dart Charge project director Nigel Gray said: “Relieving congestion and speeding up journeys at the Dartford Crossing is what Dart Charge is all about. These really encouraging figures show what a difference Dart Charge is making for drivers. Drivers commuting from Essex in to Kent are saving around 20 minutes a day, and others commuting from Kent to Essex are saving more than 15 minutes a day. We still have more work to do, working with partners to ensure that all the approaches to the tunnels in Kent are working as well as they possibly can. But I hope that these figures will reassure people that the improvements are real and that Dart Charge is working.”

Following publication of the data, the 6983 Freight Transport Association says it has bigger concerns regarding overall journey reliability. It has called on the Government and highway authorities for greater reliability on the road network through better infrastructure and control of routes such as smart motorways which increase flow reliability.
 
The freight industry judges journey times based on experience and by using route planning software, calculating the transport cost based on distance and time.  However, problems arise when incidents occur and the network fails, causing interruptions to journeys.  That is something the industry cannot predict and ends up being a cost that has to be absorbed as it cannot be planned for when contracts are drawn up.  FTA has calculated the cost of delays to transport operators equates to £1 for every minute an HGV sits in traffic.
 
Malcolm Bingham, FTA’s head of Road Network Management Policy, said: “If an HGV uses the Dartford Crossing several times in a day that would mean a time saving, possibly enabling drivers to travel further before having to take a statutory rest break in accordance with drivers’ hours rules.  However it is hard to see what is meaningfully gained by vehicles on cross-Channel journeys which are only likely to gain a few minutes for that journey on just one day.”
 
FTA has supported the improvements at Dartford in terms of the benefits they have delivered for drivers, however the Association says that they are only a short-term fix and another crossing of the Thames must be planned for and built in order to cope with future demand.

For more information on companies in this article

Related Content

  • Smarter motorway for West Yorkshire
    February 2, 2016
    Drivers on the M1 near Wakefield will benefit from reduced congestion and improved journey times after the final phase of a new US$172 million smart motorway went live. The Highways England scheme along a seven-mile stretch of motorway between junction 39 and junction 42 is the first all lane running motorway in the north, where the hard shoulder has been permanently converted to an extra lane. The smart motorway uses the latest technology to monitor traffic levels and variable speed limits on overhea
  • Technology targets Red-X transgressors
    February 25, 2016
    Currently deployed technology is being used to detect motorists ignoring the ‘red-X’ signs that indicate the lane is closed, as Colin Sowman hears. With an increasing network of ‘Smart Motorways’ - all-lane running or the opening of hard shoulders during times of congestion - Highways England (HE) has identified a growing problem with ‘red-X’ compliance. The ‘red-X’ sign signifies a closed lane or lanes and used to provide a safer area for stranded motorists, emergency workers or road maintenance crews and
  • Costing transit is complicated case
    August 19, 2015
    David Crawford welcomes fresh thinking from Canada. Public transit improvements can bring society “significantly more value” than conventional transport models normally indicate, argues Canadian researcher Todd Litman. “Traditional evaluation practices originally developed to assess roadway improvements, and focus primarily on vehicle travel speeds and operating costs. “They do not generally quantify or monetise basic mobility benefits, vehicle ownership and parking cost savings, or efficient land developme
  • Asecap: get ready to rethink everything you know
    November 15, 2022
    How can we make our infrastructure ready for new sustainability challenges? What kind of investments are needed? And who will finance them? Tolling association Asecap has some thoughts. Geoff Hadwick reports from Lisbon