Skip to main content

IRD wins $5.7m WiM upgrade contract with District of Columbia

DDoT deal will see new features added to three legacy WiM systems in DC
By Adam Hill June 23, 2023 Read time: 2 mins
IRD goes to DC (© Lunamarina | Dreamstime.com)

International Road Dynamics has been awarded a $5.7m contract to upgrade three of its legacy Weigh in Motion systems with the District of Columbia’s District Department of Transportation (DDoT)

IRD owner Quarterhill says the systems will be augmented "to perform commercial vehicle enforcement". 

Currently the systems use single load cell (SLC) WiM scales, which will be reconditioned with new load cells and platforms installed in the existing frames.

The scales have provided "continuous service for over 15 years" - a much longer life than is typical for WiM sensors, IRD insists.

The upgraded scales will have new cameras, licence plate readers, iSINC system electronics, Virtual Weigh Station software, an intelligent roadside operation computer and dynamic message signs.

DDoT end users will have complete remote access to commercial vehicle records using a laptop, IRD says.

The remote user is also able to control the message signs that direct vehicles to report for inspection and issue of overweight citations.

The company says the upgrade will improve safety and reduce cost of repairs to infrastructure, as well as boosting revenue as weight limits will be enforced and fines issued.

"With access to real-time data on truck weights and other characteristics, enforcement personnel can more easily identify violations and target their efforts where they are most needed," the company says in a statement.

Rish Malhotra, IRD president and CEO, says: “The SLC WiM system is one of the foundational technologies that built IRD’s reputation, and we’re pleased to see one of our longstanding customers continue to build their projects around our most durable WiM offering."

Related Content

  • May 24, 2016
    High-speed WIM moves onto the main highway
    High-speed weigh-in-motion is starting to make its mark on both sides of the Atlantic. As a transit country the Czech Republic experiences a large number of overloaded vehicles, which greatly increase highway maintenance costs. This prompted its Transport Ministry to trial an extension of the capabilities of the existing truck tolling system to allow the dynamic high-speed weighing of cargo vehicles. In effect the tolling enforcement gantries become weigh-in-motion (WIM) locations.
  • March 22, 2016
    IRD awarded Idaho weigh in motion contract
    The Idaho Transportation Department (ITD) in the US has awarded International Road Dynamics (IRD) a US$2,623,703 contract to supply and install a two-sided mainline weigh-in-motion (WIM) and electronic pre-clearance system on Interstate 15 at the Inkom Port of Entry. The contract includes a two-year equipment, software, and database maintenance provision to commence upon completion of the system's installation. This system will weigh and measure commercial vehicles at highway speeds upstream of the weigh
  • March 18, 2014
    Wider uses for weigh in motion data
    Colin Sowman talks to Terry Bergan of International Road Dynamics about the latest uses of weigh-in-motion systems. Raising allowable truck weight limits improve transport efficiency but leaves an ever-increasing number of bridges vulnerable to being overloaded and damaged by vehicles heavier, and in some cases far heavier, than they were designed to carry. The simplistic solution is to impose weight restrictions and erect appropriate signs - but this could have severe knock-on effect on trucking operations
  • December 28, 2021
    Artificial Intelligence applications for commercial vehicle operations
    The combination of machine learning, deep neural networks and computer vision provides opportunities to address in new ways an increasing range of functions that are a part of commercial vehicle operations. Here, IRD’s Rish Malhotra details how.