Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • Call for papers for ITS World Congress 2016
    December 3, 2015
    The call for papers for the 23rd World Congress on Intelligent Transport Systems 2016 is officially open. With the Congress theme set to explore the theme of Enhancing Liveable Cities and Communities, the deadline for submission closes on 13 January 2016.
  • Telegra launches next generation modular intelligent LED signs
    February 26, 2014
    Telegra is coming to Intertraffic Amsterdam 2014 to feature what it has termed “Signs of Intelligence!” – the company’s NextGen series of signs which are claimed to be a quantum leap in LED sign technology. They are a CE certified, lightweight, modularised and hermetically sealed sign that can be assembled in any size. Innovative technology ensures almost no maintenance required, so the company states that Operation & Maintenance (O&M) cost savings may reach 60%. State-of-the-art optical technology has redu
  • North Florida signals coordinated approach to congestion management
    October 7, 2013
    David Crawford investigates innovative congestion management in Florida. The largest US city by area is well into the implementation of an ambitious congestion management system (CMS) on the scale of those of higher-profile centres such as Seattle and San Francisco. Regional agency the North Florida Transportation Planning Organisation (NFTPO) aims to ensure that commuters on major highways in Jacksonville can rely on a minimum 72km/h (45mph) driving speed in normal conditions.
  • Signal Group launches C5000 intersection control system
    March 20, 2018
    Signal Group is launching a new traffic control product, called the C5000 intersection control system, here at Intertraffic. The company says it has taken its proven US technology from the ATC line of traffic controllers and SG line of safety monitors and created an all-in-one unit. The new unit, along with its paired power distribution assembly, can deliver world-class traffic control in an integrated card-rack based form factor. This initial launch configuration will drive up to 32 individual signal sets