Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • World Congress beckons
    May 22, 2012
    The 19th ITS World Congress will take place in Europe this year in beautiful Vienna, Austria and the preliminary programme is now available and registration is open.
  • Citilog's new CamEdge expands smart sensor series
    March 24, 2014
    Citilog, a global leader in AID (automatic incident detection), is here at Intertraffic to introduce XCamEdge, a new innovation in the company’s XCam smart sensor series. Initially developed and designed for intersection control applications such as presence detection with XCam-p, the XCam range quickly expanded, with the XCam-ng, to smart detection for intersections with queue monitoring and anti-gridlock applications. Indeed, the latest success for the XCam-ng is the smart traffic control system in Sochi
  • Asia Pacific dignitaries to see connected vehicle showcases at ITS World Congress
    June 14, 2013
    ITS Japan will use advances in the country’s ITS capabilities since it last hosted the event in 2004 as the basis of several showcases and sessions the forthcoming World Congress (Tokyo 14 – 18 October), the association’s president Hajime Amano told ITS International.
  • Entries open for ITS America’s 10th student essay competition
    January 18, 2019
    US college and university students are being invited to submit their thoughts on the future of mobility in an ITS America scheme which offers a $1,000 prize. Submissions will be accepted until 14 April for the competition, which is sponsored by Southwest Research Institute (SwRI). As well as the cash, the winner will get a paid trip to Washington, DC for the ITS America 2019 annual meeting on 4-7 June. They will need to write something on the topic: “How do you envision disruptive technologies impact