Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • Indra demonstrates urban mobility solutions
    June 10, 2014
    Spanish consulting firm Indra will take advantage of its presence at CityTech Rome this week to present its advanced traffic and public transportation management systems and demonstrate its successful implementation of the smart mobility project developed for the city of San Sebastián, Spain. In addition to its its intelligent traffic and urban transport management systems, the company will highlight its success in San Sebastian in a presentation which will look at the smart mobility project implemented
  • High performance embedded reflective road stud
    February 28, 2014
    Ennis Prismo, which has changed its name to Ennis-Flint, will use Intertraffic Amsterdam 2014 to launch the Stimsonite 380c click stud reflector, an embedded-type reflective road stud for use on highways, airfield roads, service roads and all trafficked areas requiring high performance delineation and marking to guide drivers. The stud, which is fitted with a high performance prismatic reflector system, incorporates a unique system for fixing the reflector body providing lifetime retention of the reflector
  • Siemens adds to portfolio of ITS technologies
    September 8, 2014
    This morning Siemens is using the ITS World Congress for the launch of three important new additions to its portfolio of intelligent traffic systems that will power our cities today and in the future.
  • Delcan demonstrates state of the art ATMS at ITS World Congress
    October 11, 2012
    Delcan International Corporation will feature its Intelligent NETworks (iNET), a state-of-the-art ATMS application designed to collect, disseminate, and manage transportation information. Built with scalable architecture, INETworks is an adaptable solution for small and large scale deployments. The software is divided into 25 different modules that control different aspects of the traffic system. Customers build their customised systems by using Delcan’s core modules. It is designed to support both standard