Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • Pittsburgh 2015 call for papers now open
    December 2, 2014
    Co-hosted with ITS Pennsylvania, ITS America’s 25th Annual Meeting and Exposition takes place in Pittsburgh on 1-3 June 2015 and is expected to attract more than 2,000 top transportation and technology policy-makers, innovators and engineers, investors, researchers and business leaders. The call for papers is now open and the ITS America Annual Meeting Program Committee is looking for high-quality papers for the technical program, ‘Bridges to Innovation’. The eight main program topics are: Safety; Sustai
  • Tampa Hillsborough Expressway Authority seeks volunteers to test CV technology
    August 16, 2017
    After nearly two years of planning, design and testing, the Tampa Hillsborough Expressway Authority (THEA) is now recruiting volunteer drivers and pedestrians for the Tampa Connected Vehicle (CV) Pilot. The pilot aims to demonstrate the safety, mobility and environmental benefits of connected vehicle technology. THEA expects to equip approximately 1,600 privately owned automobiles with connected vehicle technology by May 2018. Volunteers’ automobiles will be outfitted with devices that communicate other con
  • CCTV transmissions training
    January 31, 2012
    AMG Systems is launching a new comprehensive training programme which has a wider approach to transmission systems for security and surveillance applications.
  • TRA 2014 Transport Research Arena
    April 11, 2014
    TRA 2014 is to be held in Paris for the first time, showcasing French and European innovations for more efficient transport. The latest technological innovations will be on show in Paris from 14 to 17 April at CNIT - La Défense, providing an opportunity for all European stakeholders in transport research and innovation to exchange ideas and experiences about the latest scientific breakthroughs, to think about specific real-life applications and to discuss their research needs in order to guide the future