Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

Related Content

  • July 7, 2014
    Racing drivers to attend October’s iMobility Challenge
    The iMobility Challenge project is planning its biggest yearly event in Barcelona, Spain, on 9 October. The event will take place at the FCB stadium and will be of interest to transportation professional and decision-makers; high level workshop on intelligent vehicle technologies is to take place inside the stadium. For the general public and workshop delegates, vehicle technology demonstrations will take place in the stadium car park. VIPs will include FIA President Jean Todt, an EU Commissioner, an
  • March 19, 2014
    ITS Ireland explains Design Manual changes
    ITS Ireland will begin its 2014 seminar program with an examination of the changes being made to the Design Manual for Roads and Bridges (DMRB) as part of a major revision being carried out by the National Roads Authority. The revision will be in three-stages (Infrastructure, Devices, and Procedures) first of which has been published and the second is currently in production. ITS Ireland said the focus of the presentation in its seminar will be on the documents issued by the NRA and the package that
  • April 22, 2013
    Open Roads updates Alaska’s 511 website and wins Virginia contract
    Open Roads and the Alaska Department of Transportation and Public Facilities (DOT&PF) have introduced a new version of the 511 Traveler Information Website
  • December 23, 2014
    USDOT video shows benefits of connected vehicles
    The US Department of Transportation (USDOT) has also developed an animated video to illustrate the concept of connected vehicles and help the public understand its potential benefits. Connected vehicle technology enables cars to wirelessly communicate with each other, roadside infrastructure, and even personal mobile devices, sharing valuable information that could save lives, reduce congestion, and lessen the impact of transportation on our environment.