Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

Related Content

  • USDOT webinar: variable speed limits – are they for everyone?
    March 10, 2017
    The USDOT's Intelligent Transportation Systems (ITS) Professional Capacity Building program will host a free webinar, ‘Variable Speed Limits: Are They for Everyone?’ on Tuesday, 4 April from 1300 to 1430. The webinar will be hosted by Jimmy Chu, a transportation specialist for the Federal Highway Administration's Traveller Information Management Team. Variable speed limit (VSL) systems use information on traffic speed, occupancy, volume detection, weather, and road surface condition to determine appropri
  • Association News on ITS
    June 20, 2016
    Association news from around the globe; Austria, Norway, Czech Republic & Slovakia associations share plans for C-ITS. ITS UK thinks countries boasting that legal autonomous vehicles will become a regular feature on their roads are straying far from the case. ITS Australia debates driverless vehicles and Eu ecall helped on its way.
  • ITS associations highlight road safety, video analysis, new regulations
    December 19, 2016
    ITS Australia has welcomed the country's National Transport Commission's roadmap of regulatory reform for automated vehicles, Ertico-ITS Europe has been appointed as the work-package leader for dissemination, exploitation and standardisation for the EU’s Cloud LSVA, French opportunities in the Italian ITS market formed the theme of ITS France’s first international breakfast meeting, TTS Italia vice president Diego Galletta highlighted the role of new technology solutions, Chris Philip, ITS Canada’s new boar
  • Upcoming Flir traffic webinars
    October 30, 2015
    Flir Traficon Academy is organising several informative webinars for November, to provide participants with more about keeping traffic flowing. The vehicle and bicycle presence detector on 5 November at 7:00am, 1:30pm and 6:30pm will discuss the Flir ThermiCam/TrafiSense integrated thermal camera and detector that can be used for vehicle and bike detection, which uses thermal energy emitted from vehicles and bicyclists to detect their presence