Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • Aldis upgrades
    May 22, 2012
    Aldis has reduced the size of its GridSmart CPU in order to make it a better fit for traffic cabinets worldwide. The company has also released version 3.2 of the software which supports its video detection solution. Advanced tracking algorithms are combined with an enhanced, more user-friendly graphical user interface which features fully actuated intersection detection, traffic data collection, and a mini-TMC capability which uses digital pan/tilt/zoom capability for intersection surveillance.
  • Kapsch highlights CVO capabilities of its 5.9GHz DSRC technology
    March 28, 2013
    Kapsch TrafficCom will appear at the 23rd ITS America Annual Meeting with an important recent validation of the versatility of its 5.9 GHz DSRC multi-modal, integrated and interoperable technologies. Earlier this month, the company announced it had been selected by HNTB and the Michigan DOT (MDOT) to deliver a Truck Parking Connected-Vehicle System at five sites along the I-94 corridor in Michigan.
  • TDS celebrates triple product launch at Intertraffic
    March 24, 2014
    Germany-based Traffic Data Systems (TDS) is launching three ground-breaking products at Intertraffic – the TMCS-U Weigh In Motion system, Bike-DSP, and a world first in testing devices (WIM-SIM). TDS predicts that the TMCS-U with the WIM-DSP unit (Digital Signal Processing, cascadable) will become the new standard for traffic monitoring and Weigh In Motion systems. With a built-in uninterruptible power supply, the company says the device is the world’s most powerful and smallest eight-lane route station to
  • Flexible post absorbs shock, protects cyclists
    March 3, 2014
    Dutch company Erdi Verkeerstechniek will use Intertraffic Amsterdam 2014 to launch the BikeFlex Flexpost, designed to protect cyclists. This latest addition to the company’s range of poles absorbs the shock of collision and reduces the chance of injury. Made of flexible rubber/plastic, a solar flashing LED can be fitted to the top of the post to increase its visibility during hours of darkness.