Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • Comark showcases Raser 4001 detector
    March 19, 2018
    Italy-headquartered Comark, an international player in traffic detection and parking solutions, is featuring a range of products, including new devices with laser technology and the new Lora IoT vehicle detector for parking applications. The company is also showcasing its Raser 4001 detector, based on the combination of two technologies (microwave doppler radar and laser scanner) to get the best results in the detection and classification of vehicles. Also being featured is the USMI9601 sensor that uses
  • Mobile fastening and support system needs no tools
    March 3, 2014
    Austria-headquartered Twong Engineering will use Intertraffic Amsterdam 2014 for the world premiere of the patented and certified Twong mobile fastening and support system with numerous applications in the road and traffic sector. The device is adjustable and can be affixed to practically all common supporting structures such as crash barriers or concrete safety walls. Its unique design consists of a ‘clamp’ which is tightened by a load securing device, such as a tension belt, in order to support the tu
  • A shift to Active Traffic Management
    May 21, 2012
    Why has Active Traffic Management (ATM) grown in popularity as a mainstream strategy for agencies to maximise the effectiveness and efficiency of roadways, while increasing throughput and safety?
  • The case for SCATS
    May 1, 2012
    Growth in urban areas continues to stress roadway networks across the country. Local, state and federal transportation authorities turn to ITS systems to solve these problems and more efficiently utilize their current roadway. By deploying adaptive signal control systems, cities remove choke points and adjust in real time to varying traffic patterns, particularly during special events or accidents. Ultimately, this reduces vehicle emissions, motorist fuel consumption, and travel times, while improving quali