Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • New Riderscan survey on ITS and motorcycling safety
    January 17, 2014
    The Riderscan project is launching its third and last survey targeting European motorcyclists. Focusing on new technologies and powered two wheelers (PTW), the survey will feed the Riderscan report on traffic management, providing a unique opportunity to European riders to express their views on coming intelligent transport technologies. Riderscan aims to bridge the gap between road safety authorities, researchers, and industry stakeholders by setting up a detailed survey over ITS systems in relation wit
  • Fire safety in tunnels
    July 24, 2015
    Thermal imaging specialist Flir has issued a new report, Thermal imaging Cameras help Guarantee Fire Safety in Tunnels, which looks at the devastating effects of tunnel fires. It makes the case for effective fire prevention, detection and control to save lives and reduce costs and claims that thermal imaging might provide the intelligent technology required.
  • Vision Show and Conference 2016
    March 9, 2016
    The Vision Show, North America’s largest vision and imaging trade show and conference, will be held in Boston, Massachusetts at the Hynes Convention Center, 3-5 May 2016. Founded by AIA in 1996, The Vision Show provides vision users, system integrators, machine builders and OEMs with access to the latest vision and imaging technologies and applications from nearly over 100 leading manufacturers, distributors and suppliers from around the world. The accompanying conference features in-depth tutorials
  • Sistemas Palazón demonstrates sliding safety device
    March 25, 2014
    Reducing damage to vehicles and their passengers in impacts with street furniture is the object of a new type of mounting being shown by Spanish company Sistemas Palazón. Despite the huge sums of money spent by car manufacturers on improving the safety of their vehicles, severe damage can still be caused if they hit unyielding objects.