Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • Siemens unveils Sicore II ANPR camera
    March 20, 2018
    Siemens is at Intertraffic armed with an array of technologies and systems across a broad range of traffic and transport disciplines.
  • USDOT connected vehicles pilot deployment program webinar series
    September 5, 2014
    The next USDOT connected vehicle pilot deployment program webinar, Communications and role of DSRC, will take place on 19 September at 1100-1200 EST. The program seeks to combine connected vehicle and mobile device technologies in innovative and cost-effective ways. Ultimately, this program will improve traveller mobility and system productivity while reducing environmental impacts and enhancing safety. The USDOT anticipates a procurement action for multiple pilot deployment concepts in 2015.
  • ITS World Congress 2019’s Expression of Interest deadline 28 February
    February 8, 2018
    The Expression of Interest Demonstrations deadline for ITS World Congress 2019 has been confirmed for the 28 February 2018. The event will provide exhibitors with an opportunity to showcase their products and solutions to over 10,000 ITS professionals, decision makers, government officials and media from the 21-25 October 2019, at the Suntec Singapore Exhibition & Convention Centre. Demonstration themes include Connected & Automated Vehicles; Crowdsourcing & Big Data Analytics; Cybersecurity & Data Privacy
  • ITS World Congress 2016 call for papers now open
    November 13, 2015
    The call for papers for the 23rd World Congress on Intelligent Transport Systems 2016 has officially opened. The Congress will be staged at the Melbourne Convention and Exhibition Centre, Melbourne, Australia from 10 to 14 October 2016. The theme for the 2016 World Congress is “Enhancing Liveable Cities and Communities”. Scientific papers should concentrate on research and scholarships as they will be independently refereed in accordance with academic journal standards. Full papers of up to 12 pages wil