Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

Related Content

  • November 27, 2015
    Call for papers for ITS Glasgow and ITS Melbourne
    Ertico-ITS Europe has issued a call for papers for the 11th European ITS Congress 2016 to be held in Glasgow on 6-9 June 2016 and the 23rd ITS World Congress, to be held in Melbourne on 10-14 October 2016. Deadline for submissions for ITS Europe is 13 January 2016. More information is available on the website. (link http://glasgow2016.itsineurope.com/) Deadline for submission for the ITS World Congress is 13 January 2016. More information is on the ITS World Congress website. (link http://www.itsworld
  • January 23, 2014
    FHWA developing 2015 infrastructure guidance for connected vehicles
    The US Federal Highway Administration (FHWA) plans to issue deployment guidance on connected vehicles to transportation infrastructure owner/operators in 2015 and is seeking input on what would best support decision-making and deployments at the state and local level. The FHWA is specifically seeking input on the following: • What type of guidance is needed to best support the successful deployment of connected vehicle technologies? • What specific issues would you like to see addressed for plannin
  • September 26, 2012
    ITS World Congress hosts European Commission’s 3rd ITS Conference
    On 22 October 2012 the European Commission is organising its 3rd Conference on Intelligent Transport in Europe within the framework of the 19th ITS World Congress at Messe Wien, Room Stolz 1&2 and foyer Stolz. The main objective of the conference is to provide and discuss results of the ITS Action Plan and to present the status of the implementation of the ITS Directive 2010/40/EU. Additionally, the presentations will address legal issues for ITS deployment as well as European multimodal journey planners.
  • March 28, 2014
    Co-funding available for European sustainable mobility projects
    CIVITAS Capital is offering co-funding of up to 50 per cent for urban mobility projects. To be eligible, projects must focus on one of six topics: integrated planning; urban freight logistics; demand management strategies; transport telematics; safety and security; and clean fuels and vehicles. The project is supporting the take-up of sustainable urban mobility measures through an Activity Fund. This co-financing mechanism will encourage the transfer of successful measures from ‘pioneer’ cities to ‘take-