Skip to main content

Upgrading New Yorks's traffic signal timings

The New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone. MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown stud
February 28, 2013 Read time: 3 mins
The programme of upgrading intersection traffic signals has been one of three main building blocks in New York’s modernization plan (Pic: Aftab Uzzaman)
The 5590 New York City Department of Transportation instituted the Midtown in Motion project to promote multimodal mobility in the Midtown Core of Manhattan, a 110 square block area or “zone” from Second to Sixth Avenue and 42nd to 57th Street. Control extended from 86th Street to 23rd Street, focused on the core zone.

MiM provides signal timing changes on two levels: Level 1 control starts from a pre-stored library of timing plans. These are designed offline and are relevant to arterials inside the Midtown study area. As a result of applying these specially designed timing plans, traffic progression patterns are adjusted, serving the overall purpose of regulating traffic into Midtown, thereby enhancing mobility inside the study area.

Level 1 control of the system alerts operators in the NYCDOT Traffic Management Centre (TMC) to changes in travel time and ve­hicle speed and recommends signal timing adjustments. The opera­tor then reviews video cameras and other sources of information in the vicinity of the flagged avenue to identify the cause for the change in travel time. The TMC supervisor then decides the appropriate course of action to handle the event, which could be signal timing adjustments or requesting that NYPD address the situation.

To evaluate the system’s performance, a comparison of travel time by roadway segments was carried out. Based on the testing to date, in general the average speed improved noticeably. Speeds on approaches to the zone reduced to some degree as expected. Overall (inside and outside the zone) speeds improved, however.

Level 2 control is a split adjustment based on Severity Index (SI) which is related to an estimate of queue length (traffic congestion) by approach. The longer the queue is, the bigger the SI. The control algorithm attempts to reallocate green time between approaches to reduce queuing if possible and to achieve equity between the ap­proaches. Under the current implementation, the splits are adjusted at every third signal cycle.

Level 2 can reduce queuing while achieving equity during the period, where feasible. This will vary by intersection. Level 2 imple­mentation suggests that there are intervals wherein the ‘splits’ (time allocated for the green signal) can be adjusted to better service either the avenue or crosstown street, which is part of the objectives of MiM.

The extensive sensor network is enabling a rich data archive to be built. Combined with the record of actions taken and experience gained, this data will allow new traffic management plans to be de­veloped.

The data now available due to the city’s ITS sensor network, suit­ably analysed and combined with operational experience, confirms a basic principle – that significant variation in the zone is the norm. While there are clear aggregate patterns, daily fluctuations require active traffic management that is designed to anticipate that reality.

  • This is an edited extract from a paper presented by NYCDOT deputy director for systems engineering, Mohamad Talas, at the 19th ITS World Congress in Vienna, Austria, in October 2012. For a copy of the full paper, email %$Linker: 2 Email <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkEmail [email protected] NYCTOT false mailto:[email protected] true false%>.

For more information on companies in this article

Related Content

  • iMobility Awards 2014
    June 19, 2014
    The iMobility Awards Ceremony, which took place during the ITS European Congress in Helsinki, recognised the ambitious and innovative iMobility deployments carried out by winners of the awards, paving the way to safe, smart and clean road mobility. Hermann Meyer, CEO of Ertico–ITS EUROPE, and Lina Konstantinopoulou, iMobility support coordinator, presented the awards and congratulated all the nominees, paying tribute to their high calibre and professionalism before awards were presented to: TomTom for
  • Swarco integrated traffic management solutions
    September 25, 2012
    Austria-headquartered Swarco will have a very high visibility at the ITS World Congress in Vienna. The company’s exhibition stand will focus on its integrated solutions capabilities in urban and interurban traffic management, parking and e-mobility and public transport. Swarco’s Omnia all-in-one solution for intelligent traffic management will be on display as will be the company’s solution for energy-efficient intelligent street lighting.
  • Intertraffic Amsterdam concludes ‘on an all time high’
    April 12, 2016
    Intertraffic Amsterdam 2016 ended last week on an all time high, according to the organisers, who say that the variety of companies, presentations, innovations and record numbers through the doors all combined to create an exciting and interesting event. According to Intertraffic product manager Joyce de Winter, close to 800 companies from 47 countries exhibited and a record grand total of 30,104 visitors from 134 countries worldwide attended. 4,700 participants took part in the knowledge programme overa
  • Swarco features Solidplus glass beads and Eurotherm markings
    March 19, 2018
    Visitors to the two Swarco stands are in for a ‘fireworks of innovation’ and a scintillating virtual reality (VR) experience where they can enter a three-dimensional Swarco World, based on advanced gaming technology. Swarco improves quality of life by making the travel experience safer, quicker, more convenient and environmentally sound, and the company’s stands and presentation will fully underline these objectives.