Skip to main content

ITS World Congress examines challenges of autonomous vehicles?

The 2015 ITS World Congress opening ceremony saw PSA Peugeot Citroën executives arrive in an autonomous vehicle, so the International Benefits, Evaluation and Costs (IBEC) Working Group’s dedicated session proved very timely.
December 11, 2015 Read time: 3 mins
A driverless shuttle at Bordeaux (photo by Rachael Louis)
RSS

The 2015 6456 ITS World Congress opening ceremony saw 1900 PSA Peugeot Citroën executives arrive in an autonomous vehicle, so the International Benefits, Evaluation and Costs (IBEC) Working Group’s dedicated session proved very timely. 

Moderator Alan Stevens, from UK transport consultancy 491 TRL, stressed the challenges of evaluating how connected and automated vehicles will improve traffic safety; reduce congestion; decrease emissions and fuel consumption; and improve productivity. He asked: “How will drivers actually behave and what new metrics and performance measures will we need?”

The US DOT’s Marcia Pincus introduced its Applications for the Environment: Real-Time Information Synthesis (AERIS) programme, focussing on evaluation of Signal Phase and Timing (SPaT). This enables interaction between traffic signals and connected vehicles, helping to maximise efficiency when approaching signals. Its GlidePath project aims to optimise the environmental performance of vehicles nearing a signalised intersection and automation provided a 22% benefit.

Pirkko Rama from Finland’s VTT Technical Research Centre addressed future technical - and driver behaviour - impact analysis through a matrix of effects and vehicle automation levels as defined by the Society of American Engineers. She referenced behaviour studies evaluating how increasing automation could change factors such as route and speed choice, headways, lane keeping and interactions.

She highlighted key issues such as driver interaction during take-over and take-back in level 3 implementation and the effect on traffic flow impacts of assumed headways between vehicles. “Automated vehicles might initially have increased ones [headways], but in future they may have shorter ones”, she said.

Reinhard Pfliegl of A3PS Austria speculated that level 5 automation will initially arrive on motorways, followed by rural roads, with urban ones last. He “definitely” expected safety benefits (in line with automation trends) and anticipated enhanced environmental sustainability.

As to efficiency gains, he said “the situation is complicated as both the infrastructure and vehicle numbers are growing globally” while adding that funding constraints have increased this focus. He ended with a graphical simulation showing how self-organising cooperating vehicles would completely redraw the fundamental traffic flow diagram. 

From the Karlsruhe Institute for Technology, Germany, Tobias Strauss stressed automation’s role in counteracting fatigue, distraction and excessive demands on drivers. He also highlighted the challenges of evaluating, for example, sensor limitations, component failures and software complexity. “Will automation outperform humans?” he asked, while Stevens went further asking, “how far will automation need to outperform humans to gain public trust?”

Andrew Somers, of Australian consultancy Transoptim, addressed strategic policy issues for governments looking towards 2050 and proposed detailed planning of alternative scenarios, to allow development of appropriate policy levers.


RSS

Related Content

  • October 5, 2016
    New Zealand seeks comprehensive CBA framework
    New report highlights how assessing the financial benefit of deploying ITS is an involved and evolving calculation Following a global search, five key action areas have emerged from the New Zealand Transport Agency’s recent scoping of a more comprehensive cost–benefit analysis framework for evaluating planned ITS deployments. A report commissioned from engineering consultancy Aecom New Zealand sets out the groundwork for more closely-defined assessments that will convincingly support public-sector policy ma
  • July 17, 2012
    ITS technology reduces congestion, improves workzone safety
    As the road-building season gets under way in the US, the Federal Highway Administration has just published a White Paper which deals with the use of ITS technology in work zones. On 30 April 2009, the US Federal Highway Administration (FHWA) published a White Paper which was prepared by the US Department of Transportation (USDOT) to inform public agencies about the use of ITS to manage construction work zones. This is a particularly relevant topic given the large number of construction projects that are ex
  • January 13, 2017
    Australia trials shortened cost benefit evaluation
    A shortened and tailored cost benefit assessment is helping show the worth of C-ITS in Australia. An Australian ‘rapid cost-benefit assessment’ method, introduced to help prepare the ground for co-operative ITS (C-ITS) deployment and showcased at the ITS World Congress in Melbourne, has generated encouraging results.
  • October 29, 2014
    ITF Corporate Partnership Board projects highlight ways forward
    The findings of the first four projects launched by the ITF Corporate Partnership Board (CPB), the organisation's platform for engaging with the private sector, have been announced. CPB projects are designed to enrich policy discussion with a business perspective. They are launched in areas where CPB member companies identify an emerging issue in transport policy or an innovation challenge to the transport system. Led by ITF, work is carried out in collaborative fashion in working groups consisting of CP