Skip to main content

How typical?

Deployment of solar-powered LED road studs has provided significant cost benefits whilst reducing KSIs on notorious routes in South Africa. Can these results be replicated in other regions of the world and on less notorious stretches of road? According to Kevin Adams, Astucia's CEO, they can.
July 30, 2012 Read time: 3 mins
Kevin Adams, CEO of Astucia
RSSDeployment of solar-powered LED road studs has provided significant cost benefits whilst reducing KSIs on notorious routes in South Africa. Can these results be replicated in other regions of the world and on less notorious stretches of road? According to Kevin Adams, 1875 Astucia's CEO, they can.

"Astucia SolarLite studs have been installed in many regions of the world, in countries as widespread as Venezuala, Peru, Poland and Australia, and they are helping to reduce global KSI rates," Adams points out. "Their use in the UK has also shown dramatic reductions in accident rates on roads right across the country from Norfolk to Barry in Wales. With over eight fatal accidents in the UK every day and around half the fatalities occurring at night, these studs provide an innovative aid in the bid to make our roads safer."

Adams cites the deployment in Norfolk, where the A143 links the Norfolk Broads towns of Beccles and Great Yarmouth, as a case in point. The road crosses the Haddiscoe Marshes on a sinuous, 2km embankment known as the Haddiscoe Dam.

Dominant accident type

Adams: "Over a three-year period there were 22 recorded accidents, two of which involved loss of life, along with six causing serious injury and 14 others considered as minor. The dominant accident types, comprising 95 per cent of all accidents recorded, were as a result of loss of control. With its route across the low-lying marshes a high number of these accidents appeared to be during damp and misty conditions that are often prevalent, with 40 per cent occurring in the dark and 65 per cent when the road was wet."

To reduce the number of accidents at this location Norfolk County Council took a number of initiatives which involved resurfacing the road to improve skid resistance and also installing Astucia solar-powered road studs. The initial installation was comprised of over 200 studs providing delineation of the centreline. The positioning of the studs was carefully designed to provide drivers with advanced indication of the nature of the road layout ahead.

Immediate improvement

Nevil Calder, Principal Engineer - Safety and Traffic Management for Norfolk County Council is delighted with the results of the safety scheme. "In the first two years since the scheme was introduced we noticed an immediate improvement in road safety; there were only five recorded accidents, all of which were slight, with none occurring in the dark and only one during wet conditions. The overall accident frequency has reduced from 7.3 per year to 2.3 whilst the severity ratio has reduced from 36 per cent to zero."

With each fatality in the UK costing around $3.05 million, this would have seen an initial cost of over $6.6 million for 22 KSIs. After installation of SolarLite studs this would have been dramatically reduced. As Adams points out, with an installation cost of less than $10,000 for the studs, this provides a compelling financial case, even before considering the terrible consequences of a serious or fatal accident cause.

Adams concedes that, at first glance, some people may consider the initial installation costs of Astucia Solarlite studs to be prohibitive at around $48 (installed). However, as he points out, lasting over the full lifetime of the road surface they can provide greater value than the traditional Halifax-style studs which require replacement on a fairly regular basis.

"This means that the whole life cost of the SolarLite stud, which has an average life of eight-10 years, is actually cheaper than the traditional road stud, with a significant reduction of accidents where they are deployed,"
he adds. RSS

For more information on companies in this article

Related Content

  • Norwegian study finds electric cars 'pose environmental threat'
    October 5, 2012
    According to a study by the Norwegian University of Science and Technology, electric cars might pollute much more than petrol or diesel-powered cars. Researchers found greenhouse gas emissions rose dramatically if coal was used to produce the electricity. Electric car factories also emitted more toxic waste than conventional car factories, claims their report in the Journal of Industrial Energy. However, in some cases electric cars still made sense, the researchers said.
  • No sign of a decrease in motor fatalities says National Safety Council
    August 24, 2016
    Preliminary estimates from the National Safety Council indicate that motor vehicle deaths in the US were nine per cent higher through the first six months of 2016 than in 2015, and 18 per cent higher than two years ago at the six month mark. An estimated 19,100 people have been killed on US roads since January and 2.2 million were seriously injured. The total estimated cost of these deaths and injuries is US$205 billion. The upward trend began in late 2014 and shows no signs of decreasing. Last winter, t
  • Future traffic management needs new thinking, new technology
    January 23, 2012
    One of the biggest problems facing US ITS professionals, says Georgia DOT's Hugh Colton, is the constrained thinking which is sometimes forced upon those making procurement decisions. It is time, he says, to look again at how we do things. In the November/December 2010 edition of this journal, Pete Goldin interviewed Joseph Sussman, chairman of the US's ITS Program Advisory Committee. Amongst other observations that Sussman made was that, technologically, ITS in the US is 10 years behind that in the world-l
  • In-vehicle safety standard released for consultation
    July 24, 2012
    The new ISO 26262 standard for safety-related vehicle systems is now available for comment. MIRA's David Ward talks to ITS International about what the standard will mean for vehicle and road safety in the future. The publication on 8 July this year of ISO 26262 as a Draft International Standard (DIS) marks an important progression for the automotive - and, in time, the cooperative infrastructure - industries. A couple of years from now, automotive OEMs will be able to subscribe to a unifying standard for s