Skip to main content

Counting the environmental costs of ITS deployment

David Crawford looks at the latest thinking about calculating the benefits associated with the environmental side of ITS schemes. The penny is dropping that some environmental costs “are being shifted outside the traditional bounds of evaluation methods” for ITS-based road transport projects, according to researchers at the UK University of Leeds’ Institute for Transport Studies.
October 29, 2015 Read time: 7 mins
Dr Ben Kolosz - "Our form of evaluation treats ITS as a complete system"

David Crawford looks at the latest thinking about calculating the benefits associated with the environmental side of ITS schemes.

The penny is dropping that some environmental costs “are being shifted outside the traditional bounds of evaluation methods” for ITS-based road transport projects, according to researchers at the UK 2153 University of Leeds’ Institute for Transport Studies. While taking longer-term ‘whole-life’ perspectives in evaluating benefits and costs doesn’t yet apply across the board, “we are seeing evidence of growing movement in that direction,” Dr Susan Grant-Muller told ITS International.

She and colleague Dr Ben Kolosz have developed a pioneering approach in extending cost–benefit analysis for the sustainability impact of inter-urban ITS’ – which, she says, “anticipates likely trends in evaluation methodology in the roads sector.” As a ‘test bed’, the researchers have chosen the busy M42 motorway (freeway), in the English West Midlands as an illustration of taking into account the full environmental impacts of three ITS applications, using current official traffic figures.

Roadside infrastructure

The first, active traffic management (ATM) – which combines variable speed limits with dynamic sign-controlled peak-time hard-shoulder running - is already operational on the M42 and elsewhere in the UK, on mainland Europe and in the US. Researchers note that the roadside infrastructural components are connected to a data store and a traffic control centre, for which there are energy costs.

Other, near-market technologies modelled are intelligent speed adaptation and platooning. All three emerge as potentially contributing positively to sustainability, in terms of environmental and socio-economic benefits. But, to assess these in detail, the researchers want an enhancement of the conventional evaluation process, which relies on a single discounting method for economic–environmental modelling over lengthy timeframes.

This, they say, results in inaccuracies when monetising the environmental cost savings - a ‘general limitation’ of the standard method, and propose an extension to incorporate the concept of dual discounting. Such a concept has already been introduced into business modelling to calculate the cost/benefit trade-offs of environmental policies aimed at reducing greenhouse gas emission reductions. Relatively new in the transport sector, they believe it can cover “the indirect economic, social and environmental impacts of ITS deployment.”

These last, calculated in Europe in terms of climate change mitigation, cover traffic management centre and data centre energy emissions, reduced tailpipe pollution, the ‘embedded’ emissions involved in roadside infrastructure manufacture, additional hardware needed for installation in vehicles, and safety measures. This would enable public authorities to make decisions on direct investments for traffic management measures using a conventional discounting rate, while using the new method for environmentally-oriented schemes. 

Offset emissions

On this basis, the research indicates that ATM, as deployed on the M42, will offset greenhouse gas emissions by 99kt of CO2 equivalency over a 25-year lifespan, after taking into account expected improvements in vehicle technology and despite the indirect environmental impacts currently being taken into account. These sit alongside the carbon offset that the system generates through improved management of the transport network and smoother flows.

The result is a current benefit-cost ratio (BCR) of 5.89, although the researchers acknowledge that the figure will drop over the system’s lifecycle owing to rising energy costs. One reason for the system’s high performance, they say, is that it incurs no in-vehicle equipment costs for the vehicle manufacturer or driver - unlike intelligent speed adaptation (ISA) and platooning.

The researchers have gone on to model an evaluation of ISA over a 40-year appraisal period. They assume that the technology would operate independently of any roadside infrastructure, relying on satellite communications and onboard digital mapping software, and therefore no data centre emissions are taken into account. 

As heavy trucks are already fitted with automatic speed limiters, the researchers assume that ISA would apply only to cars and light trucks. They do not see implementation as being practical at the chosen test site and calculate a negative BCR owing to the cost of the in-vehicle equipment. Within a national perspective, however, there could be different results, with the system recuperating benefits as hardware becomes standardised and the technology matures.

Platooning

The evaluation of platooning, carried out for the period from 2030 to 2050, assumes the system will operate on only one lane, and that only cars will be equipped. It will need roadside infrastructure, typically in the central reserve, to support communication between vehicles in order to maintain the platoon and to carry vehicle-to-infrastructure traffic information.

In principle, the researchers believe that the system could reduce emissions by around 20% and save 280kt of CO2 equivalency over 15 years of operation on the M42. Accident prevention would be at a high level, thanks to the fully automated technology, but if an accident did arise, it could affect the entire platoon and increase the scale of the damage.

If proven to be successful, platooning could become widely available, through new vehicle purchases from 2035, within the M42 area. Ignoring in-vehicle connectivity costs would produce a positive BCR; these could in any case be mitigated by government grants of the kind made available to keep down the cost of electric vehicles.

Concludes Kolosz: “Our form of evaluation treats ITS as a complete system. It takes into account, not just the roadside, but areas where environmental costs are separated and managed by, for example, a regional traffic control centre. Our method therefore extends the evaluation boundary fully to capture the whole architecture of the proposed ITS service, making previously hidden elements visible for evaluation.”

Transport technology: the rebound effect

491 TRL’s chief scientist and research director Dr Alan Stevens, who is also an IBEC member, considers non-utopian KPIs in a development of the ‘Thought Leadership’ article published in the consultancy’s Future View series.

“The ‘rebound effect’ refers to behaviours or other systemic responses that tend to counteract the benefits of planned improvements. For example, vehicle fuel efficiency or safety gains seem to make people drive a little further or slightly more recklessly. These effects need to be recognised when estimating future benefits of any changes.  

Different queues

The introduction of self-service ticket machines at stations has led to different kinds of (rather than less) queuing, with little improvement in throughput. Transport technology implementations often appear to be more about efficiency gains for operators with any economic or service benefits for travellers seen as a secondary effect.

An additional consequence of the growing efficiency of mass transportation is increasing reliance on technology such that, when problems occur, the consequences can be severe. European air traffic control problems just before Christmas 2014 are one such example.

Utopia - as portrayed in visions of future transport - of happy and informed commuters making fast, smooth and uncongested, technology-enabled journeys will be just as much an illusion in the future as it is now. History shows that technology democratises and lowers barriers to participation (a kind of rebound effect); so transport resources are shared with more people. 

A governmental colleague once confided that he uses a ‘rule of three’ when evaluating technology proposals. Companies saying they can deliver a project in one year typically take three, two-year projects take six, and so on.

It is not surprising, then, that proposed transport safety improvements don’t always deliver all the estimated benefits, in the three (nine?) years between calculating these benefits and implementation, other improvements will have reduced the ‘target’. In addition, the longer implementation is delayed, the less relevant the technology will look. Perhaps, then, in evaluating the potential benefits of new technology there are two points to consider. First, human behaviour or other factors tend to counteract the desired effects. Second, in the time taken to achieve deployment, the world will have changed so much that the technology proves less valuable.

No surprise

This is not intended to paint a gloomy and fatalistic picture. As scientists and engineers we should not be surprised when our a priori estimates of benefits are later shown to be optimistic.

However, as advocates for technology delivering societal benefits, we may need to acknowledge, and even participate in, the group euphoria of optimistic prediction to try new approaches and systems - at least some of which will prove beneficial.

Taking a user perspective on mass transit, therefore, we should perhaps direct technology less towards safer, faster and more efficient journeys, and more towards travel that provides increased user comfort and robustness against disruption. Those will be the KPIs that I’ll look for in future evaluations”.

For more information on companies in this article

Related Content

  • Telematics standards need to evolve to keep up with technology
    July 30, 2012
    Scott Andrews and Scott McCormick take a look at how standards development for the telematics environment needs itself to evolve in order to stay abreast of technological advances. While the road has been somewhat arduous, telematics has evolved from a research activity to a resource for fleet operators, consumers and road management authorities.
  • Signal optimisation reduces congestion, improves travel times
    February 2, 2012
    The Metropolitan Government of Nashville and Davidson County's Department of Public Works(MPW) identified seven corridors in the County that experience heavy traffic congestion and needed traffic signal timing improvements to improve traffic flow as well as air quality and fuel consumption. The seven corridors included a total of 223 signalised intersections. To conduct this study, termed the Traffic Signal Optimisation Study for the Metro Nashville Signal System, MPW received funding from the Federal Conge
  • On-demand is Denver’s command
    March 6, 2017
    While demand responsive transit overcomes many problems, it has been too expensive to provide for the general public but Denver believes it may have found a solution. Cost-efficiently meeting fluctuating passenger levels within available resources can prove a serious challenge for general publicoriented demand responsive transit. There is growing US interest in this mode - as distinct from the already established use of demand responsive transit for specialised needs, such as paratransit for the disabled –
  • Plug and play approach unifies workzone ITS
    July 18, 2012
    Caltrans District 7 is finalising a ConOps document which will detail a plug-and-play to work zone ITS operation. The organisation's Allen Z. Chen elaborates. Before August is out, on current planning, the California Department of Transportation (Caltrans) District 7 (which covers Los Angeles and Ventura Counties, with a combined population of close to 11 million people) intends to have finalised a Concept of Operations (ConOps) document dealing with Work Zone Transportation Management Systems (WZTMS). The