Skip to main content

Commercial Vehicle Operations in New Brunswick

The Province of New Brunswick has prepared a deployment plan for ITS applications for Commercial Vehicle Operations (CVO). The plan, developed by Delcan Corporation, identifies a number of potential ITS/CVO investments and initiatives to be implemented. One of the initiatives is the Motor Carrier Profile (MCP), which has been selected as one of the sample projects for the application of the Project Evaluation Methodology Framework for Canadian ITS.
July 16, 2012 Read time: 5 mins
New Brunswick's new ITS applications deployment plan concentrates on commercial vehicle applications.
RSSThe Province of New Brunswick has prepared a deployment plan for ITS applications for Commercial Vehicle Operations (CVO). The plan, developed by 285 Delcan Corporation, identifies a number of potential ITS/CVO investments and initiatives to be implemented. One of the initiatives is the Motor Carrier Profile (MCP), which has been selected as one of the sample projects for the application of the Project Evaluation Methodology Framework for Canadian ITS.

Commercial vehicles in New Brunswick are subject to enforcement of the province's weights and dimensions legislation and the National Safety Code (NSC) requirements through inspections on-road and at commercial vehicle inspection facilities.


Project:
Commercial Vehicle Operations - Motor Carrier Profile for New Brunswick, Canada

Cost:
$1,125,000 (Initial Capital Cost)

ROI:
Net Present Value: $726,000
Benefit/Cost: 1.5

Benefits:
Increases in public agency efficiency:
Savings in resources and staffing levels over the years as required by increasing truck traffic volumes;
Increased ability to monitor performance of commercial vehicle fleet;
Operational efficiency of commercial vehicle inspection facilities.
Road user benefits:
Decrease in number of inspections for some carriers;
Time savings and increased customer satisfaction.
In order to keep commercial vehicle operations safe, the Province has set an enforcement level target of one vehicle stopped per shift-hour. With the growth of truck traffic volumes expected for the next few years, however, the percentage of commercial vehicle traffic stopped at the inspection facilities will naturally decrease and safety levels may potentially deteriorate.

Benefits

Commercial vehicle safety inspections take place to prevent crashes and, therefore, fatalities, injuries and property damage. A clear relationship exists between the number of inspections and prevented crashes. It is reasonable then to assume that in order not to allow a deterioration of provincial safety levels current commercial vehicle inspection and enforcement targets in New Brunswick should be maintained in the future. Through the implementation of technology under the MCP a more focused safety enforcement system can be put in place achieving the same highway safety levels that can be gained through institutional measures such as changing schedules, extending staff hours or adding staff or inspection facilities.

Economic analysis

The MCP project is primarily oriented to the CVO enforcement staff providing significant improvements in their ability to monitor the safety performance of the commercial vehicle fleet and in the operational efficiency of the roadside commercial vehicle inspection facilities. This will be accomplished through the access and use of up-to-date motor carrier profile, safety and recent contact data by Commercial Vehicle Enforcement (CVE) officers during the inspection processes. Since it is reasonable to assume that enforcement levels in New Brunswick must be maintained in the future, the relevant comparison for the purpose of the project evaluation is between an increase in resources and staff versus the use of technology for alternative inspection strategies.

Thus, while benefits of this element are ultimately related to safety they also make a direct contribution in the area of agency efficiency.

The quantification of benefits and the benefit:cost analysis for the Motor Carrier Profile project for New Brunswick considers a base case defined as a continuation of the current enforcement practices - that is, increasing resources over the years as required by increasing truck traffic volumes in order to meet current enforcement levels and targets, and an alternative case defined as the implementation of the proposed Motor Carrier Profile system.

The economic analysis included a quantification of the Net Present Value (NPV) and the Benefit:Cost (B:C) ratio.The NPV is the present-day value of benefits (savings in annual enforcement costs) minus the present-day value of costs (capital costs). An NPV greater than zero means that the net benefits of the project exceed the project's investment costs and that it is therefore economically efficient.

The B:C is calculated by dividing the present-day value of benefits (annual savings) by the present-day value of investment costs. A ratio of greater than one means that the project is worthwhile.

The Motor Carrier Profile element of the CVO programme, both the NPV and the B:C, indicate that the project is economically viable and a good investment for the Province.

As stated before, a number of assumptions have been made, including truck traffic growth rates and cost estimates. The most important underlying assumption is perhaps related to the fact that fewer but more focused inspections should result in provincial safety levels that are similar, or better, than existing ones under current enforcement practices. Preliminary indications and stakeholder surveys appear to suggest so.

Quantified benefits for this project relate to increases in public agency efficiency. Due to the nature of current (and future) commercial vehicle enforcement operations in New Brunswick no delays are or will be experienced at commercial vehicle inspection facilities. However, the implementation of the MCP should eventually result in a decrease in the number of inspections for a carrier, saving time and increasing customer satisfaction. These benefits, however, were not considered for this sample case.

Should New Brunswick decide to proceed with the proposed MCP system, future performance monitoring should be put in place to confirm the validity of the assumptions made and provide lessons for future similar undertakings.


RSS

For more information on companies in this article

Related Content

  • New technology revolution in urban traffic control?
    January 26, 2012
    Urban traffic control is a well-defined and practised art. Nevertheless, there are technologies here and on the horizon with the potential to revolutionise how we do things. By Gavin Jackman and Andrew Kirkham, TRL, and Jason Barnes. Distributed monitoring and control of urban traffic networks and flows is nothing new. PC-based Urban Traffic Control (UTC) is now well established and operating in many locations around the world. However, it is worth considering the effects of the huge growth in the use of sm
  • Significant safety benefits of limiting truck speeds
    March 30, 2012
    New research released this week by the US Federal Motor Carrier Safety Administration confirms the clear safety benefits of using technology to electronically govern and limit the top speed of commercial trucks. "This study confirms what ATA has been saying for years – speed kills and one of the most effective ways to prevent hundreds, if not thousands, of crashes on our highways is to slow all vehicles down, including large trucks," American Trucking Association’s president and CEO Bill Graves said.
  • US eyes European model for Illinois toll road upgrade
    May 30, 2014
    David Crawford welcomes the adoption of European-style ITS technology by the US. The Jane Addams Memorial Tollway in Illinois, US is well on the way towards becoming a ‘smart traffic corridor’, taking full advantage of active traffic management (ATM or ‘managed lanes’) technology that originated in Europe. It is one of the first American toll roads to do so; preliminary work began in 2014 and will continue through to 2016. Jane Addams is one of four toll roads operated by the publicly-owned Illinois State T
  • Refurbishing ageing VMS with new technology
    January 26, 2012
    Virginia DoT faced a challenge common to many highway authorities around the world: the need, in economically challenging times, to replace ageing variable message signs reaching the end of their operational life. For some 25 years now, since the mid 80s, Virginia Department of Transportation (VDoT), has deployed variable message signs (VMS) as part of its motorist information systems. Throughout the state there are still many old 'flip-disk' signs. Some of the companies that provided these electronic messa