Skip to main content

Commercial Vehicle Operations in New Brunswick

The Province of New Brunswick has prepared a deployment plan for ITS applications for Commercial Vehicle Operations (CVO). The plan, developed by Delcan Corporation, identifies a number of potential ITS/CVO investments and initiatives to be implemented. One of the initiatives is the Motor Carrier Profile (MCP), which has been selected as one of the sample projects for the application of the Project Evaluation Methodology Framework for Canadian ITS.
July 16, 2012 Read time: 5 mins
New Brunswick's new ITS applications deployment plan concentrates on commercial vehicle applications.
RSSThe Province of New Brunswick has prepared a deployment plan for ITS applications for Commercial Vehicle Operations (CVO). The plan, developed by 285 Delcan Corporation, identifies a number of potential ITS/CVO investments and initiatives to be implemented. One of the initiatives is the Motor Carrier Profile (MCP), which has been selected as one of the sample projects for the application of the Project Evaluation Methodology Framework for Canadian ITS.

Commercial vehicles in New Brunswick are subject to enforcement of the province's weights and dimensions legislation and the National Safety Code (NSC) requirements through inspections on-road and at commercial vehicle inspection facilities.


Project:
Commercial Vehicle Operations - Motor Carrier Profile for New Brunswick, Canada

Cost:
$1,125,000 (Initial Capital Cost)

ROI:
Net Present Value: $726,000
Benefit/Cost: 1.5

Benefits:
Increases in public agency efficiency:
Savings in resources and staffing levels over the years as required by increasing truck traffic volumes;
Increased ability to monitor performance of commercial vehicle fleet;
Operational efficiency of commercial vehicle inspection facilities.
Road user benefits:
Decrease in number of inspections for some carriers;
Time savings and increased customer satisfaction.
In order to keep commercial vehicle operations safe, the Province has set an enforcement level target of one vehicle stopped per shift-hour. With the growth of truck traffic volumes expected for the next few years, however, the percentage of commercial vehicle traffic stopped at the inspection facilities will naturally decrease and safety levels may potentially deteriorate.

Benefits

Commercial vehicle safety inspections take place to prevent crashes and, therefore, fatalities, injuries and property damage. A clear relationship exists between the number of inspections and prevented crashes. It is reasonable then to assume that in order not to allow a deterioration of provincial safety levels current commercial vehicle inspection and enforcement targets in New Brunswick should be maintained in the future. Through the implementation of technology under the MCP a more focused safety enforcement system can be put in place achieving the same highway safety levels that can be gained through institutional measures such as changing schedules, extending staff hours or adding staff or inspection facilities.

Economic analysis

The MCP project is primarily oriented to the CVO enforcement staff providing significant improvements in their ability to monitor the safety performance of the commercial vehicle fleet and in the operational efficiency of the roadside commercial vehicle inspection facilities. This will be accomplished through the access and use of up-to-date motor carrier profile, safety and recent contact data by Commercial Vehicle Enforcement (CVE) officers during the inspection processes. Since it is reasonable to assume that enforcement levels in New Brunswick must be maintained in the future, the relevant comparison for the purpose of the project evaluation is between an increase in resources and staff versus the use of technology for alternative inspection strategies.

Thus, while benefits of this element are ultimately related to safety they also make a direct contribution in the area of agency efficiency.

The quantification of benefits and the benefit:cost analysis for the Motor Carrier Profile project for New Brunswick considers a base case defined as a continuation of the current enforcement practices - that is, increasing resources over the years as required by increasing truck traffic volumes in order to meet current enforcement levels and targets, and an alternative case defined as the implementation of the proposed Motor Carrier Profile system.

The economic analysis included a quantification of the Net Present Value (NPV) and the Benefit:Cost (B:C) ratio.The NPV is the present-day value of benefits (savings in annual enforcement costs) minus the present-day value of costs (capital costs). An NPV greater than zero means that the net benefits of the project exceed the project's investment costs and that it is therefore economically efficient.

The B:C is calculated by dividing the present-day value of benefits (annual savings) by the present-day value of investment costs. A ratio of greater than one means that the project is worthwhile.

The Motor Carrier Profile element of the CVO programme, both the NPV and the B:C, indicate that the project is economically viable and a good investment for the Province.

As stated before, a number of assumptions have been made, including truck traffic growth rates and cost estimates. The most important underlying assumption is perhaps related to the fact that fewer but more focused inspections should result in provincial safety levels that are similar, or better, than existing ones under current enforcement practices. Preliminary indications and stakeholder surveys appear to suggest so.

Quantified benefits for this project relate to increases in public agency efficiency. Due to the nature of current (and future) commercial vehicle enforcement operations in New Brunswick no delays are or will be experienced at commercial vehicle inspection facilities. However, the implementation of the MCP should eventually result in a decrease in the number of inspections for a carrier, saving time and increasing customer satisfaction. These benefits, however, were not considered for this sample case.

Should New Brunswick decide to proceed with the proposed MCP system, future performance monitoring should be put in place to confirm the validity of the assumptions made and provide lessons for future similar undertakings.


RSS

For more information on companies in this article

Related Content

  • Ramp metering delivers - again
    January 27, 2012
    Though still controversial, ramp metering, which has been around for nearly 50 years, continues to deliver substantial benefits, and generally for relatively small cost. Kansas City is a case in point. In March 2010, Kansas City Scout, a partnership between the Missouri and Kansas Departments of Transportation to provide ITS for the greater Kansas City Area, activated the first ramp metering system in the region. The project is located on an 8.85km (5.5 mile) section of Interstate 435 from Metcalf Avenue to
  • Utah DOT to deploy cloud-based truck sorting
    July 17, 2013
    The state of Utah will soon deploy Help’s 360SmartView truck screening technology throughout its network of truck inspection facilities to focus on at-risk carriers. 360SmartView is a cloud-based truck-sorting system that will electronically assess all trucks entering weigh stations and present roadside officers with a real-time, complete and correct snapshot of compliance with state and federal safety and weight requirements. According to Help, States that have deployed 360SmartView in the past have report
  • Putting a stop to intersection indecision
    March 9, 2015
    David Crawford takes a look at innovations to reduce crashes at rural intersections. Intersection crashes continue to represent a worryingly large share of deaths and serious injuries across US highway networks. Statistics from the US Department of Transportation’s Federal Highway Administration show that an average of 21% of road traffic accident deaths occur at crossings. The National Highway Traffic Safety Administration (NHTSA) calculates that intersection crashes account for 48% of all injury-related i
  • Transport and traffic management for major sporting events
    February 2, 2012
    Maurizio Tomassini, Isis, and Monica Giannini, Pluservice, detail the STADIUM project, which is intended to provide those responsible for planning major international events with a blueprint for success