Skip to main content

Camera lowering poles aid maintenance, cut costs

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment In 2001, Jim Larsen was a traffic operations engineer with Ada County Highway District (ACHD) located in southern Idaho.
January 27, 2012 Read time: 1 min

Project:
Use of camera lowering technology@@@Benefits:

• 92% per cent saving per year in maintenance costs

• 65-80% less time per CCTV site cleaning and maintaining the cameras

• No freeway lane closures or traffic control are needed to maintain CCTV cameras

• Greater CCTV mounting heights

• Camera maintenance is now a one -man job

• Better choice of camera location

Related Content

  • Rochester solves $8.5m transit question
    October 22, 2018
    RTS in Rochester, New York, saves by working with Conduent to upgrade its CAD/AVL systems rather than ripping them up and replacing them. Andrew Bardin Williams hops on for a ride. What to do, what to do?” It’s a question every transportation official must ask when faced with legacy assets, equipment and software that are nearing the end of their useful life. Nothing lasts forever, right? Freeways need to be repaired, bridges replaced, traffic management software updated and railway cars turned into
  • The benefits of Lidar
    March 21, 2022

    While Lidar is gaining ground in the ITS industry, it has not yet reached the level of mass adoption where it shows up frequently in requests for proposals (RFPs) from cities and DoTs.

  • Pioneering IntelliDrive technologies in Michigan
    February 2, 2012
    Pete Goldin reports on upgrades to the USDOT's Michigan Test Bed, where IntelliDrive technologies are being pioneered
  • Scania tests truck platooning
    February 11, 2015
    Dutch Infrastructure and Environment Minister Melanie Schultz van Haegen, along with representatives of the European Commission, recently took part in test drive of truck platooning on the A28 in the Netherlands. The convoy consisted of three Scania R500 Streamline trucks; the steering was done by truck drivers, but speed and braking were controlled by the front truck using wi-fi technology. The plan is to have fully self driving trucks in the future. This method of coupled drive, based on adaptive cr