Skip to main content

Camera lowering poles aid maintenance, cut costs

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment
January 20, 2012 Read time: 3 mins

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment

In 2001, Jim Larsen was a traffic operations engineer with Ada County Highway District (795 ACHD) located in southern Idaho.

Established in 1972 as an independent government entity, it is responsible for all planning, construction, maintenance, operations, rehabilitation and improvements to Ada County's urban streets, rural roadways and bridges. Geographically, the district's jurisdiction includes the cities of Boise, Eagle, Garden City, Kuna, Meridian, Star and the unincorporated areas of Ada County; it is the only consolidated countywide
highway district in the State of Idaho.

Project:
Use of camera lowering technology

Benefits:

• 92% per cent saving per year in maintenance costs

• 65-80% less time per CCTV site cleaning and maintaining the cameras

• No freeway lane closures or traffic control are needed to maintain CCTV cameras

• Greater CCTV mounting heights

• Camera maintenance is now a one -man job

• Better choice of camera location
795 ACHD maintains and operates around 3,400km of roads and streets in Ada County, with an estimated value of US$3 billion.

This infrastructure includes facilities that range from multi-lane, arterial streets to narrow, farm-to-market roadways. It also maintains 400 traffic signals and has an extensive fibre/IP communications network of some 240km of installed fibre.

ACHD has the only TMC in the State of Idaho that operates 5:30am-6:30pm Monday to Friday which is jointly funded by ACHD and the Idaho Transportation Department.

District staff maintain over 550 IP/Ethernet devices, and with only two electronic technicians to maintain all ITS devices, they are always looking for ways to cut ITS maintenance costs and also improve efficiency.

Cut costs

And that's how Jim Larsen's Eureka! moment came about.

"While on vacation back in Providence, Rhode Island, in 2001, I was travelling down I-95 and saw the 25m (80ft) camera lowing poles on the freeway," Larsen explains. "I realised this may be a great way to cut costs associated with cleaning and maintaining our CCTV cameras."

After thoroughly investigating camera lowering poles and technology, in 2002 ACHD decided to begin changing existing 15.25m (50ft) fixed CCTV poles on I-84 and I-184 in the Boise region to the 93 MG Squared camera lowering poles. For new freeway installations both ACHD and the Idaho Transportation Department decided to make these lowering poles an agency standard.

"The benefits of this technology are significant in a whole range of areas," Larsen says. "In cost terms, ACHD is saving 92 per cent per year in maintenance costs with the 22 CCTV lowering poles we now have in place.

We have also achieved lower design costs for camera/pole installation projects because fewer cameras are needed with the greater CCTV mounting heights we now have, such as around 20m (70ft) at major freeway interchanges in Boise. Also, camera maintenance is now a one-man job whereas two were needed in the past with fixed camera poles." Although contributing significant cost savings, other benefits also greatly improve operational and maintenance factors. For instance, Larsen has calculated that 65-80 per cent less time per CCTV site is needed to clean and maintain cameras. consideration.

"We can now clean a camera on a lowering pole in 15 minutes per site, whereas fixed poles required 40-75 minutes per site, depending on traffic control." And that highlights another key benefit: no freeway lane closures or traffic control are needed to maintain CCTV cameras on lowering poles, which not only benefits drivers with less freeway delay, but is inherently safer for maintenance crews. Indeed, as Larsen points out, since no bucket trucks are needed to clean or maintain cameras, ACHD is not limited by their 15m height limitation. Devices can be installed at the most desirable operational height, and there is a much better choice of pole locations because bucket truck access is no longer aconsideration.

For more information on companies in this article

Related Content

  • Road user charging - replacing the gas tax with a mileage based fee
    January 19, 2012
    Oregon Department of Transportation's James Whitty discusses his state's progress with VMT fee-based charging. Back in 2001, the state of Oregon stole a lead on the rest of the US when it decided to address the need to do something about the gas tax and its decreasing ability to fund highway construction and upkeep. Recognising that a dwindling pot of money could only shrink further as vehicles became more fuelefficient, Oregon's Legislative Assembly passed laws which led to the setting up, by the state's g
  • Smoother running on Florida’s I-4
    March 11, 2025
    The Sunshine State is pioneering new implementations of V2X tech designed to smooth traffic flows and save lives. Andrew Stone shares the story so far…
  • Study finds speed cameras cut fatal accidents
    March 15, 2012
    In the first study of its kind in Qatar, researchers at Weill Cornell Medical College in Doha (WCMC-Q) have found a dramatic decrease in fatal motor injuries following the deployment of speed cameras. The research – Motor vehicle injuries in Qatar: time trends in a rapidly developing Middle Eastern nation – has been published in the peer-reviewed British medical journal, Injury Prevention. Most speed cameras in Qatar were installed during 2007, giving researchers the opportunity to examine injury rates befo
  • Wireless technology aids workzone communications
    June 7, 2012
    Need for a temporary communication fix during a construction project has led to rapid deployment of a permanent but simplistic wireless broadband network in Chandler, Arizona When a major construction project was expected to disrupt highway communications in the city of Chandler, Arizona, the city’s engineers went looking for a simple solution. They needed a way of maintaining data connections with three consecutive intersections along Arizona Avenue in Chandler while construction necessitated the severin