Skip to main content

Camera lowering poles aid maintenance, cut costs

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment
January 20, 2012 Read time: 3 mins

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment

In 2001, Jim Larsen was a traffic operations engineer with Ada County Highway District (795 ACHD) located in southern Idaho.

Established in 1972 as an independent government entity, it is responsible for all planning, construction, maintenance, operations, rehabilitation and improvements to Ada County's urban streets, rural roadways and bridges. Geographically, the district's jurisdiction includes the cities of Boise, Eagle, Garden City, Kuna, Meridian, Star and the unincorporated areas of Ada County; it is the only consolidated countywide
highway district in the State of Idaho.

Project:
Use of camera lowering technology

Benefits:

• 92% per cent saving per year in maintenance costs

• 65-80% less time per CCTV site cleaning and maintaining the cameras

• No freeway lane closures or traffic control are needed to maintain CCTV cameras

• Greater CCTV mounting heights

• Camera maintenance is now a one -man job

• Better choice of camera location
795 ACHD maintains and operates around 3,400km of roads and streets in Ada County, with an estimated value of US$3 billion.

This infrastructure includes facilities that range from multi-lane, arterial streets to narrow, farm-to-market roadways. It also maintains 400 traffic signals and has an extensive fibre/IP communications network of some 240km of installed fibre.

ACHD has the only TMC in the State of Idaho that operates 5:30am-6:30pm Monday to Friday which is jointly funded by ACHD and the Idaho Transportation Department.

District staff maintain over 550 IP/Ethernet devices, and with only two electronic technicians to maintain all ITS devices, they are always looking for ways to cut ITS maintenance costs and also improve efficiency.

Cut costs

And that's how Jim Larsen's Eureka! moment came about.

"While on vacation back in Providence, Rhode Island, in 2001, I was travelling down I-95 and saw the 25m (80ft) camera lowing poles on the freeway," Larsen explains. "I realised this may be a great way to cut costs associated with cleaning and maintaining our CCTV cameras."

After thoroughly investigating camera lowering poles and technology, in 2002 ACHD decided to begin changing existing 15.25m (50ft) fixed CCTV poles on I-84 and I-184 in the Boise region to the 93 MG Squared camera lowering poles. For new freeway installations both ACHD and the Idaho Transportation Department decided to make these lowering poles an agency standard.

"The benefits of this technology are significant in a whole range of areas," Larsen says. "In cost terms, ACHD is saving 92 per cent per year in maintenance costs with the 22 CCTV lowering poles we now have in place.

We have also achieved lower design costs for camera/pole installation projects because fewer cameras are needed with the greater CCTV mounting heights we now have, such as around 20m (70ft) at major freeway interchanges in Boise. Also, camera maintenance is now a one-man job whereas two were needed in the past with fixed camera poles." Although contributing significant cost savings, other benefits also greatly improve operational and maintenance factors. For instance, Larsen has calculated that 65-80 per cent less time per CCTV site is needed to clean and maintain cameras. consideration.

"We can now clean a camera on a lowering pole in 15 minutes per site, whereas fixed poles required 40-75 minutes per site, depending on traffic control." And that highlights another key benefit: no freeway lane closures or traffic control are needed to maintain CCTV cameras on lowering poles, which not only benefits drivers with less freeway delay, but is inherently safer for maintenance crews. Indeed, as Larsen points out, since no bucket trucks are needed to clean or maintain cameras, ACHD is not limited by their 15m height limitation. Devices can be installed at the most desirable operational height, and there is a much better choice of pole locations because bucket truck access is no longer aconsideration.

For more information on companies in this article

Related Content

  • Bespoke ITS is helping to reduced collisions on America’s rural roads
    October 22, 2014
    David Crawford cherrypicks conference and award highlights Almost 30% of all US citizens live in rural areas or very small communities, and 34 of the 50 states exceed this level in their own populations, with the proportions rising as high as 85%. And although rural routes carry only 35% of all traffic, the accidents that occur on them account for some 54% of all US road traffic accident deaths.
  • IP technology the route to efficient multi-agency control rooms
    February 1, 2012
    As IP-based technology makes its presence felt in the control room sector, it makes for greater economies of scale and also offers a migration path for many other traffic management technologies. So says Barco's Guy Van Wijmeersch. Efficient control room collaboration and decision-making is only possible if operators and decision-makers have easy and timely access to information. In many cases, that information also needs to be accessible to multiple users at the same time. This is certainly so in the case
  • Canadian authorities convinced of enforcement safety benefits
    November 28, 2012
    Cost-benefit analysis invariably finds highly in favour of speed and red light enforcement, particularly so in Edmonton in the Alberta province of Canada, where authorities need no convincing of the merits of road safety engineering. Justification of enforcement efforts on economic grounds has been reinforced this year, by a study of the costs and benefits of red light enforcement. New York-based economic research firm John Dunham & Associates carried out this latest analysis for American Traffic Solutions
  • TransCore wins three ITS contracts from Nevada DOT
    April 25, 2012
    TransCore has won three separate contracts to provide ITS design, construction and integration services for the Nevada Department of Transportation. The projects include a 30-mile extension of the FAST traffic management system along I-15 from outside Las Vegas to the California border; a 15-mile expansion of the FAST traffic management system along I-515 on the eastern side of the Las Vegas metropolitan area; and a 10-mile segment of I-80 in Reno, Nevada, as part of a roadway reconstruction project.