Skip to main content

Camera lowering poles aid maintenance, cut costs

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment
January 20, 2012 Read time: 3 mins

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment

In 2001, Jim Larsen was a traffic operations engineer with Ada County Highway District (795 ACHD) located in southern Idaho.

Established in 1972 as an independent government entity, it is responsible for all planning, construction, maintenance, operations, rehabilitation and improvements to Ada County's urban streets, rural roadways and bridges. Geographically, the district's jurisdiction includes the cities of Boise, Eagle, Garden City, Kuna, Meridian, Star and the unincorporated areas of Ada County; it is the only consolidated countywide
highway district in the State of Idaho.

Project:
Use of camera lowering technology

Benefits:

• 92% per cent saving per year in maintenance costs

• 65-80% less time per CCTV site cleaning and maintaining the cameras

• No freeway lane closures or traffic control are needed to maintain CCTV cameras

• Greater CCTV mounting heights

• Camera maintenance is now a one -man job

• Better choice of camera location
795 ACHD maintains and operates around 3,400km of roads and streets in Ada County, with an estimated value of US$3 billion.

This infrastructure includes facilities that range from multi-lane, arterial streets to narrow, farm-to-market roadways. It also maintains 400 traffic signals and has an extensive fibre/IP communications network of some 240km of installed fibre.

ACHD has the only TMC in the State of Idaho that operates 5:30am-6:30pm Monday to Friday which is jointly funded by ACHD and the Idaho Transportation Department.

District staff maintain over 550 IP/Ethernet devices, and with only two electronic technicians to maintain all ITS devices, they are always looking for ways to cut ITS maintenance costs and also improve efficiency.

Cut costs

And that's how Jim Larsen's Eureka! moment came about.

"While on vacation back in Providence, Rhode Island, in 2001, I was travelling down I-95 and saw the 25m (80ft) camera lowing poles on the freeway," Larsen explains. "I realised this may be a great way to cut costs associated with cleaning and maintaining our CCTV cameras."

After thoroughly investigating camera lowering poles and technology, in 2002 ACHD decided to begin changing existing 15.25m (50ft) fixed CCTV poles on I-84 and I-184 in the Boise region to the 93 MG Squared camera lowering poles. For new freeway installations both ACHD and the Idaho Transportation Department decided to make these lowering poles an agency standard.

"The benefits of this technology are significant in a whole range of areas," Larsen says. "In cost terms, ACHD is saving 92 per cent per year in maintenance costs with the 22 CCTV lowering poles we now have in place.

We have also achieved lower design costs for camera/pole installation projects because fewer cameras are needed with the greater CCTV mounting heights we now have, such as around 20m (70ft) at major freeway interchanges in Boise. Also, camera maintenance is now a one-man job whereas two were needed in the past with fixed camera poles." Although contributing significant cost savings, other benefits also greatly improve operational and maintenance factors. For instance, Larsen has calculated that 65-80 per cent less time per CCTV site is needed to clean and maintain cameras. consideration.

"We can now clean a camera on a lowering pole in 15 minutes per site, whereas fixed poles required 40-75 minutes per site, depending on traffic control." And that highlights another key benefit: no freeway lane closures or traffic control are needed to maintain CCTV cameras on lowering poles, which not only benefits drivers with less freeway delay, but is inherently safer for maintenance crews. Indeed, as Larsen points out, since no bucket trucks are needed to clean or maintain cameras, ACHD is not limited by their 15m height limitation. Devices can be installed at the most desirable operational height, and there is a much better choice of pole locations because bucket truck access is no longer aconsideration.

For more information on companies in this article

Related Content

  • Sharjah tunnel contract for Kapsch
    May 14, 2025
    Five-year, five-tunnel United Arab Emirates deal also involves maintenance
  • Bitsensing makes modern history in fair Verona
    July 3, 2025
    Shakespeare’s Verona was a place of star-cross’d lovers – today, it’s the traffic which is more of a problem. Euichul Kim at Bitsensing takes up our story…
  • Vehicle ownership - a thing of the past?
    May 22, 2012
    Convergence of electron-powered vehicles with connected vehicle technologies could mean that only a few decades from now the idea of owning a vehicle will be entirely alien to the road user. By Technolution chief scientist Dave Marples with Jason Barnes Even when taken individually, many of the developments going on and around vehiclebased mobility will bring about major changes in transportation. Taken collectively, the transformations we might expect are nothing short of profound. Enumeration of the influ
  • ITS needs continuity at the policy-making level
    February 1, 2012
    ITS needs to be sold to politicians in plainer terms and we need to be encouraging greater continuity at the policy-making level says Josef Czako, chairman of the IRF's Policy Committee on ITS. At the ITS World Congress in New York in 2008, the International Road Federation (IRF) held the inaugural meeting of its Policy Committee on ITS. The Policy Committee's formation, says its chairman, Kapsch's Josef Czako, reflects an ongoing concern over the lack of deployment of ITS technology on roads in anything li