Skip to main content

Camera lowering poles aid maintenance, cut costs

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment
January 20, 2012 Read time: 3 mins

It was while on vacation in Providence, Rhode Island that Jim Larsen had a Eureka! moment

In 2001, Jim Larsen was a traffic operations engineer with Ada County Highway District (795 ACHD) located in southern Idaho.

Established in 1972 as an independent government entity, it is responsible for all planning, construction, maintenance, operations, rehabilitation and improvements to Ada County's urban streets, rural roadways and bridges. Geographically, the district's jurisdiction includes the cities of Boise, Eagle, Garden City, Kuna, Meridian, Star and the unincorporated areas of Ada County; it is the only consolidated countywide
highway district in the State of Idaho.

Project:
Use of camera lowering technology

Benefits:

• 92% per cent saving per year in maintenance costs

• 65-80% less time per CCTV site cleaning and maintaining the cameras

• No freeway lane closures or traffic control are needed to maintain CCTV cameras

• Greater CCTV mounting heights

• Camera maintenance is now a one -man job

• Better choice of camera location
795 ACHD maintains and operates around 3,400km of roads and streets in Ada County, with an estimated value of US$3 billion.

This infrastructure includes facilities that range from multi-lane, arterial streets to narrow, farm-to-market roadways. It also maintains 400 traffic signals and has an extensive fibre/IP communications network of some 240km of installed fibre.

ACHD has the only TMC in the State of Idaho that operates 5:30am-6:30pm Monday to Friday which is jointly funded by ACHD and the Idaho Transportation Department.

District staff maintain over 550 IP/Ethernet devices, and with only two electronic technicians to maintain all ITS devices, they are always looking for ways to cut ITS maintenance costs and also improve efficiency.

Cut costs

And that's how Jim Larsen's Eureka! moment came about.

"While on vacation back in Providence, Rhode Island, in 2001, I was travelling down I-95 and saw the 25m (80ft) camera lowing poles on the freeway," Larsen explains. "I realised this may be a great way to cut costs associated with cleaning and maintaining our CCTV cameras."

After thoroughly investigating camera lowering poles and technology, in 2002 ACHD decided to begin changing existing 15.25m (50ft) fixed CCTV poles on I-84 and I-184 in the Boise region to the 93 MG Squared camera lowering poles. For new freeway installations both ACHD and the Idaho Transportation Department decided to make these lowering poles an agency standard.

"The benefits of this technology are significant in a whole range of areas," Larsen says. "In cost terms, ACHD is saving 92 per cent per year in maintenance costs with the 22 CCTV lowering poles we now have in place.

We have also achieved lower design costs for camera/pole installation projects because fewer cameras are needed with the greater CCTV mounting heights we now have, such as around 20m (70ft) at major freeway interchanges in Boise. Also, camera maintenance is now a one-man job whereas two were needed in the past with fixed camera poles." Although contributing significant cost savings, other benefits also greatly improve operational and maintenance factors. For instance, Larsen has calculated that 65-80 per cent less time per CCTV site is needed to clean and maintain cameras. consideration.

"We can now clean a camera on a lowering pole in 15 minutes per site, whereas fixed poles required 40-75 minutes per site, depending on traffic control." And that highlights another key benefit: no freeway lane closures or traffic control are needed to maintain CCTV cameras on lowering poles, which not only benefits drivers with less freeway delay, but is inherently safer for maintenance crews. Indeed, as Larsen points out, since no bucket trucks are needed to clean or maintain cameras, ACHD is not limited by their 15m height limitation. Devices can be installed at the most desirable operational height, and there is a much better choice of pole locations because bucket truck access is no longer aconsideration.

For more information on companies in this article

Related Content

  • Vehicle to improve safety and reduce disruption on motorways
    September 16, 2016
    A new maintenance assistance vehicle (MAV) developed by Highways England and Mott MacDonald to help replace overhead signs was inspired by an aircraft catering vehicle and is set to reduce the duration of roadworks.
  • Delphi’s self-driving Audi completes 3,400-mile trip
    April 7, 2015
    UK company Delphi Automotive has completed the longest automated drive in North America, travelling from San Francisco to New York in the first coast-to-coast trip ever taken by an automated vehicle. Nearly 3,400 miles were covered with 99 per cent of the drive in fully automated mode. The drive was used by Delphi engineers to research and collect information that will help further advance active safety technology – the most rapidly growing technology sector of the auto industry. The team collected nearly
  • Omnitracs partners with Drivewyze on weigh station bypass services
    December 3, 2015
    Fleet management solutions provider Omnitracs has partnered with Drivewyze to equip Omnitracs mobile computing platforms with its PreClear Weigh Station Bypass services. Drivewyze uses GPS technology and the mobile internet instead of traditional battery-operated transponders to add transponder-like functionality to electronic logging devices (ELDs). The Drivewyze service is available at 611 fixed weigh stations and mobile inspection sites throughout 35 US states, meaning it provides bypasses at more locati
  • Hearing highlights economic importance of transportation system
    February 18, 2013
    The US Committee on Transportation and Infrastructure’s first hearing of the 113th Congress focused on the importance of infrastructure to the US economy and examined the role played by the Federal Government in ensuring safe, efficient, and reliable infrastructure. Chairman Bill Shuster highlighted how the quality of the nation’s infrastructure affects the lives of Americans in many ways on a daily basis, and how the Federal role in ensuring a strong transportation network is firmly rooted in the first day